EPSON LX-300+5/00 EPSON LX-300+ - 1User Replaceable Parts Options Single-bin Cut-sheet Feeder (C806371)Feeds up to 50 sheets of ordinary single-sheet
EPSON LX-300+10 - EPSON LX-300+ 5/00To adjust the top-of-form position for continuous paper loaded on the pull tractor, see the following example:Firs
EPSON LX-300+5/00 EPSON LX-300+ - 115. After you set the tear-off position, press the Pause button to turn off the Micro Adjust mode.6. Tear off the p
EPSON LX-300+12 - EPSON LX-300+ 5/00Adjusting the Paper Thickness LeverBefore printing on special paper, you need to change the paper thickness settin
EPSON LX-300+5/00 EPSON LX-300+ - 13Default SettingsWhile you can often set the default settings through your application software or printer driver,
EPSON LX-300+14 - EPSON LX-300+ 5/00Bidirectional Alignment If you notice that the vertical lines in your printout are not properly aligned, you can u
EPSON LX-300+5/00 EPSON LX-300+ - 15Cleaning the PrinterTo keep your printer operating at its best, you should clean it thoroughly several times a yea
EPSON LX-300+16 - EPSON LX-300+ 5/00
EPSON LX-300+2 - EPSON LX-300+ 5/00ElectricalEnvironmentalLine spacing 1/6 inch or programmable in 1/216-inch incrementsPrintable columns 80 columns (
EPSON LX-300+5/00 EPSON LX-300+ - 3PaperUse recycled paper, envelopes, and single-sheet multipart forms only under normal temperature and humidity con
EPSON LX-300+4 - EPSON LX-300+ 5/00Paper AlignmentPrinting starts at “0” on the scale. The unprintable area is to the left of the “0”.Printable AreaSi
EPSON LX-300+5/00 EPSON LX-300+ - 5Safety Approvals120 VSafety standards UL 1950CSA C22.2 No. 950EMI FCC part 15 subpart B class BCSA C108.8 class B23
EPSON LX-300+6 - EPSON LX-300+ 5/00Selecting FontsAfter entering the Micro Adjust mode by holding down the Pause button for three seconds, you can cha
EPSON LX-300+5/00 EPSON LX-300+ - 7Paper PositionsTop-of-Form PositionThe top-of-form position is where the printer starts printing on single sheets o
EPSON LX-300+8 - EPSON LX-300+ 5/00Printing with the Pull TractorTo load continuous paper using the pull tractor, you must move the tractor to the pul
EPSON LX-300+5/00 EPSON LX-300+ - 97. Slide the left sprocket unit so that its sprockets match the position of the holes in the paper and lock the uni
Comments to this Manuals