Epson NX100 Quick Start Guide download pdf

Epson Stylus

NX100 Series

Start Here

6 Release the scanner support and lower the scanner.

7 Press the Stop button to charge the ink. Charging takes about

2 minutes.

Caution: Don’t turn off the NX100 Series while it is charging or you’ll

waste ink.

Unpack

If anything is missing, contact Epson as described on the back.

Caution: Do not open the ink cartridge package until you are ready to install

the ink. Cartridges are vacuum packed to maintain reliability.

Canada only: For French speakers, remove stickers from the backing sheet

and place over corresponding text on the control panel.

Remove all the tape.

Stop

3 Flip the feeder guard forward. Then squeeze the edge guide and

slide it left.

4 Load paper against the right edge and underneath the tab, then slide

the edge guide over.

Note: Don’t load the paper sideways.

5 Flip the feeder guard back.

4114365 Rev.0

1-F C

4114365 Rev.0

1-F M

4114365 Rev.0

1-F Y

4114365 Rev.0

1-F K

Turn on the NX100 Series

1 Connect the power cable.

Note: Do not connect to the computer at this time.

2 Press the On button.

Load paper

1 Open the paper support.

2 Open the output tray and pull out the extension.

8½ 11

4 6

Install cartridges

Note: Do not load paper yet.

1 Lift up the scanner and prop it up with the support.

2 Shake the ink cartridges, then unpack them.

3 Remove only the yellow tape from each cartridge.

Caution: Do not remove any other seals or the cartridge may leak.

4 Insert the cartridges in the holder for each color.

5 Press each cartridge down until it clicks.

(Included for Canada only)

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Start Here

Epson Stylus® NX100 SeriesStart Here6 Release the scanner support and lower the scanner.7 Press the Stop button to charge the ink. Charging takes abo

Page 2

Epson Stylus® NX100 SeriesStart Here6 Release the scanner support and lower the scanner.7 Press the Stop button to charge the ink. Charging takes abo

Page 3

Epson Stylus® NX100 SeriesStart Here6 Release the scanner support and lower the scanner.7 Press the Stop button to charge the ink. Charging takes abo

Page 4

Epson Stylus® NX100 SeriesStart Here6 Release the scanner support and lower the scanner.7 Press the Stop button to charge the ink. Charging takes abo

Page 5 - Control panel

Macintosh®1 Make sure the NX100 Series is NOT CONNECTED to your computer.2 Insert the NX100 Series CD.3 Double-click the Epson icon.4 Click Instal

Page 6

Macintosh®1 Make sure the NX100 Series is NOT CONNECTED to your computer.2 Insert the NX100 Series CD.3 Double-click the Epson icon.4 Click Instal

Page 7

Macintosh®1 Make sure the NX100 Series is NOT CONNECTED to your computer.2 Insert the NX100 Series CD.3 Double-click the Epson icon.4 Click Instal

Page 8

Macintosh®1 Make sure the NX100 Series is NOT CONNECTED to your computer.2 Insert the NX100 Series CD.3 Double-click the Epson icon.4 Click Instal

Comments to this Manuals

No comments

Epson NX100 Quick Start Guide

Browse online or download Quick Start Guide for Multifunctionals Epson NX100. Epson NX100 Start Here Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Multifunctionals Epson NX100