3. Switch on the internal SCSI terminator, as shown.4.Set the SCSI ID switch to 2, as shown.5.Turn on the scanner, then the computer. (Always turn on
Installing EZ-SCSI SoftwareIf you are running Windows NT, you do not need to installEZ-SCSI software. Skip to the “Installing Adobe Photoshop”procedur
10. Remove the final installation disk from the drive and chooseContinue.The installation program creates an Adaptec SCSI programgroup containing Adap
6.The next screen prompts you for the path name of theWindows directory. If the displayed path is where yourWindows program resides, choose OK.7.When
9.Choose the Test button. If the scanner and EPSON ScannerUtility software are set up correctly, the scanner scans theimage; after a few moments, the
Installing the ATM programFollow these steps to install Adobe Type Manager:1.2.3.4.5.6.Start Windows.Insert the ATM program disk into a diskette drive
4.Type A:SETUP.EXE (or B:SETUP.EXE) in the Command Linetext box and choose OK. The Adobe Photoshop Installerdialog box appears, as shown below.51951:W
Selecting the Acquire DeviceBefore you can scan an image from Photoshop, you need toselect the scanner as the acquire device. Follow these steps:1.Fro
lnstalling Kai’s Power ToolsBefore you install Kai’s Power Tools, make sure that you haveinstalled Adobe Photoshop. Then follow these steps:1.Insert D
7.Remove the final installation disk from the drive.You can access Kai’s Power Tools filters from AdobePhotoshop by choosing KPT filters or KPT Extens
EPSON®ES-1200C Pro PCGetting Started@Tl& mumal is printed on 50% recycled paper, 10% post-consumer content.
3.Carefully close the document cover so that you do notdisturb the position of the photograph on the glass.Choose Acquire in the File menu; then choos
5.In the scroll bar next to the Image Type button, select theimage type appropriate for your scan. If you are scanning acolor photograph, select Color
When you have defined the portion of the image you wantto scan, choose the Scan button. In a few moments, thescanned image is imported into the Photos
Calibrating Your SystemCalibration allows you to match your scanner and your outputdevice so that you can reproduce images that are very close tothe o
2.Choose Screen Calibration from the Calibrate menu. Yousee the screen shown below:IIAdjust the slider below until the grayareas appear the same.I I I
Note:If you change your display monitor, you will need to create a newscreen calibration profile. Do this by selecting Calibration Profile inthe Confi
7.Open the file for the calibration chart file you exported. Thechart contains nine blocks of color gradations surroundedby a black border on three si
5.In the File Name field, type the filename of the calibration fileyou want to create. Make sure you assign a CAL extensionto this file.6.In the Descr
The scanner scans the image using information from thecalibration profile to produce the best possible image for yourprinter.Selecting the Right Resol
Copyrighted MaterialsLike photocopiers, scanners can be misused by impropercopying of copyrighted material. Although Section 107 of theU.S. Copyright
All rights reserved. No part of this publication may be reproduced, stored in a retrievalsystem, or transmitted in any form or by any means, electroni
Epson America, Inc.20770 Madrona AvenueTorrance, California 90503CPD20838/94
IntroductionThis package contains all the hardware and software you needfor professional quality color scanning.Here are the contents of your scanner
System and Memory RequirementsFor the scanner hardware and software to work properly, yoursystem must have at least the following configuration:ciclcl
Installing the Interface CardUse this procedure to install a SCSI interface card. For moredetailed installation instructions, see the manual that came
10. Replace the cover and reconnect any cables youdisconnected. Plug the power cord into an electrical outlet.Setting Up the ScannerFollow these steps
4.Firmly connect the power cable to the power inlet on the rearof the scanner and the other end into an appropriatelygrounded outlet as shown below.If
Connecting the Scanner to the ComputerUse this procedure to connect the scanner directly to the SCSIport on your computer using the cable included in
Comments to this Manuals