User’s GuideNPD4075-00 EN
Printer PartsFront section1. Adapter holderFix the roll paper when setting the roll paper.2. Roll paper coverOpen the roll paper cover when you set or
Cause What to doThe print is not positionedproperly on the paper.Have you specified the print area?Check the print area in the settings of the applica
Cause What to doThe back of the printed paper issoiled.Set PAPER SIZE CHECK to ON in the Menu mode.If the print image is bigger than the paper width a
Feeding or ejecting troublesCause What to doUnable to feed or eject paper.Is the paper loaded in the right position?Refer to the following for the cor
Cause What to doThe paper is jammed.To remove jammed paper, follow the steps below:1. If roll paper is jammed, open the roll paper cover and cut the p
Cause What to doThe paper is jammed 4. Open the front cover if the paper is jammed inside the printer.Caution:Be careful not to touch the cables aroun
Other troublesCause What to doColor ink runs out quickly evenwhen printing in the Black modeor when printing black data.Color ink is consumed in print
Using the PrinterSoftware (Windows)Printer SoftwareIntroductionThe printer software CD-ROM includes the followingsoftware. See its online help for det
EPSON Status Monitor 3This utility provides you with printer statusinformation, such as the ink cartridge status, theempty space of the maintenance ta
Example:The printer driver window appears.Make the settings as necessary, and then start printing.From the Printer iconWhen you make common settings o
BRight-click your printer icon, and clickPrinting Preferences.The printer driver window appears.The settings you make here become the defaultsettings
The Control PanelButtons, Lights, andMessagesYou can check the ink remaining and printer status onthe control panel.Buttons 1. Power button ( )Turns t
❏ For Windows XP/Windows 2000, click the button on the top right of the printer driverwindow, and then click the item.Using the Printer UtilitiesThe E
EPSON Status Monitor 3This utility provides you with printer statusinformation, such as the ink cartridge status, theempty space of the maintenance ta
Note:In the Monitoring Preferences dialog box, select theShortcut Icon check box to display a shortcut icon onyour Windows System Tray. Right-click th
Viewing information in Monitoring PreferencesIn the Monitoring Preferences dialog box, you canselect error types for which you wish to receivenotifica
DSelect the target printer icon, and then click OK.EFollow the on-screen instructions to completeuninstallation.When the confirmation message appears,
Using the PrinterSoftware (Mac OS X)Printer SoftwareIntroductionThe printer software CD-ROM includes the followingsoftware. See the Setup Guide for in
EPSON Printer Utility3You can execute the printer maintenance functions,such as Nozzle Check, Head Cleaning. EPSON PrinterUtility3 is installed with t
Accessing the PrinterDriverTo access the printer driver, follow the steps below.The following procedures may differ depending onthe application you us
Getting InformationThrough Online HelpTo access the online help, click the button in thedialog of the printer driver.Using Printer UtilitiesThe Epso
EPSON LFP Remote Panel 2This utility lets you optimize your printer. You canstart this utility only if it is installed. See the EPSONLFP Remote Panel
7. Menu button ( )❏ Enters the Menu mode when pressed in theREADY state. See “Menu Mode” on page 15❏ Enters the PRINTER STATUS menu if pressedduring p
Viewing information in EPSONStatusMonitorEPSON StatusMonitor provides you with detailedprinter status information, a graphic display of the inkcartrid
For Mac OS X 10.3.9 to 10.4:Double-click the Applications folder, and thendouble-click the Utilities folder. Double-clickPrinter Setup Utility.EDelete
KSelect Uninstall from the pull-down menu, andthen click the Uninstall button.LFollow the on-screen instructions to uninstallthe printer driver.Uninst
Variety of PrintingsColor Adjustment by thePrinter DriverYou can adjust colors using the printer driver duringprinting by setting one of the following
EMake the necessary settings.See the online help of the printer driver fordetailed information.Note:You can perform the color adjustment bychecking th
Note:When using Adobe Photoshop CS3 or later,Adobe Photoshop Lightroom 1 or later, orAdobe Photoshop Elements 6 or later in MacOS X 10.5, make sure th
For Mac OS X 10.3.9 to 10.4:FCheck other settings, and then start printing.Black-and-White PrintingWhen you want to make prints with a clear black suc
CClick Custom for the Mode in the Main menu,and click Advanced.DMake the necessary settings, and then startprinting.For more detailed information, see
COpen the advanced settings dialog.For Mac OS X 10.5:Click Advanced Color Settings.For Mac OS X 10.3.9 to 10.4:Select Printer Color Management.DMake t
Borderless PrintingYou can print your data without margins on paper.There are two types of borderless printing.Note:If you are using roll paper, all f
Display1. MessagesDisplays the printer status, operation, and errormessages. See “Error Messages on the LCD Panel” on page87 See “Details of Menu mo
Application settingsSet the size of the image data using the Page Settingdialog box of the application software.For Auto Expand❏ Set the same paper si
DSelect Borderless, and then click Expansion.ESelect Auto Expand or Retain Size. If youselect Auto Expand, set the amount ofenlargement.Max 3 mm for l
For Mac OS X 10.3.9 to 10.4:Select Expansion.Note:Moving the slider towards Min decreases theamount of the image enlargement; however, asthis amount d
Roll paper cut for borderless printingWhen you use roll paper for borderless printing, the paper cut operation is different according to the Borderles
Enlarge or Reduce SizePrintingYou can fit the size of your data to the size of paperyou print on. There are three ways to enlarge orreduce the size of
CSelect the paper size that is loaded in theprinter from the Output Paper list.Proportionally enlarges or reduces the size ofyour data to make it fit
Fit to Roll Paper Width (Windows only)AOpen the printer driver window. See “From Windows applications” on page107BClick the Page Layout tab, and then
CustomLets you define the percentage you want to reduce orenlarge.For WindowsAOpen the printer driver window. See “From Windows applications” on page1
Pages Per Sheet PrintingYou can print two or four pages of your document onone sheet of paper.If you print continuous layout data prepared at A4size,
For Mac OS XAOpen the Print dialog. See “Accessing the Print dialog” on page117BSelect Layout from the list to specify the orderin which the pages wil
5. Roll Paper Counter iconDisplays the remaining amount of roll paper. When you make the following settings in ROLLPAPER REMAINING of the PAPER SETUP
APrepare the print data by using an application.The printer driver automatically enlarges theimage data during printing.BOpen the printer driver windo
GCheck the other settings, and then start printing.Joining the sheets together along the guideThe steps to join the sheets together are differentwheth
For poster printing with marginsWhen you select Overlapping Alignment Marks, thefollowing marks are printed on the paper. See theprocedures below to j
FCut the bottom of upper sheets along thealignment mark (horizontal blue line).The guide is black for the black-and-whiteprinting.GLay the upper sheet
Printing on Custom PaperYou can also print on a custom paper, using the stepsbelow.The size you can register is as follow.Paper width Epson Stylus Pro
CSet the custom paper size you want to use, andthen click Save.❏ You can enter up to 24 single-bytecharacters for the Paper Size Name.❏ You can easily
DEnter the paper width, paper height, andmargins, and then click OK.The paper size and printer margin you can setis as follow.Page setup Paper size Ma
Banner Printing on RollPaperThis section explains how to print a banner andpanorama pictures.There are two ways to print a banner.Paper source Applica
CSelect Roll Paper or Roll paper (Banner) fromthe Source list.Note:Roll Paper (Banner) can be used for anapplication that supports banner printing.DCl
Note:You cannot make settings if you are using anapplication that supports banner printing.HMake sure the Optimize Enlargement checkbox is selected.IC
8. Option usage iconDisplays whether options are available to use or not.Option Icon DescriptionAutoTake-upReel UnitAvailableNot availableNo icon Not
Printing with Non-EpsonMediaWhen using non-Epson media, make the papersettings according to the paper characteristics beforeprinting. There are two wa
CSelect the registered number for the user setting.You can select the number from 1 to 10.1. Press the / button to select thenumber you want to regis
FPrint a paper thickness test pattern.1. Press the / button to selectTHICKNESS PATTERN, and then press the button.2. Press the button to print the p
To use the registered custom settings, follow the stepsbelow.1. Press the button to enter the Menu mode.2. Press the / button to display PAPER SETUP
CEnter the name in the Name box, and thenclick Save.You can choose a setting you have registered from theSelect Setting list box.Saving as a custom me
Menu arrangementYou can arrange the Select Settings, Media Type, andPaper Size items.AClick the Utility tab, and then click MenuArrangement.BSelect th
Exporting or ImportingYou can export or import the settings you haveregistered as a file.Exporting the settingsAOpen the Save or Deletes Select Settin
Using Layout ManagerThe Layout Manager function allows you to place themultiple print data made by different applicationsfreely and print them at one
Printing with Layout ManagerNote:Use the Layout Manager function when connected tothe printer (in the printable state).APrepare the print data by usin
GFrom the File menu in the Layout Managerwindow, select Properties... Make the printsettings on the printer driver window.Set Media Type, Source, Siz
1. Select a menu.Example: When selecting PRINTER SETUPAPress the button to enter the Menu mode.The first menu appears on the LCD panel.BPress the /
The printer profile for each sheet that is needed whenperforming color management is installed with theprinter driver of this product. You can select
CSelect Custom for the Mode in the Main menu,and select ICM, and then click Advanced.DIn the ICM dialog box, select Driver ICM(Basic) or Driver ICM (A
Color management by Host ICM (Windows)Use image data in which an input profile has beenembedded. The application needs to support ICM.AMake the settin
Color management by ColorSync (Mac OS X)Use image data in which an input profile has beenembedded. The application needs to supportColorSync.For Mac O
BOpen the Print dialog. See “Accessing the Print dialog” on page117CSelect Printer Color Management, and thenselect ColorSync.DCheck other settings, a
CSet the color management to off.For Windows, select Custom for the Mode inthe Main menu, and then select Off (No ColorAdjustment).Note:When using Win
Paper InformationPaper InformationEpson offers specially designed media for ink jet printers to meet most high-quality printing needs.Item Explanation
Roll paperPremium Glossy Photo Paper (250)Size Borderless Auto Wind *2 Core diameterForward Backward406 mm 16" Recommended Y Y 3"610 mm 24&q
Premium Luster Photo Paper (260)Size Borderless Auto Wind *2 Core diameterForward Backward254 mm 10" Recommended N N 3"300 mm 12"406 mm
Photo Paper Gloss 250Size Borderless Auto Wind *2 Core diameterForward Backward432 mm 17" Recommended Y Y 3"610 mm 24"914 mm *1 36"
B. When you execute a functionExample: When selecting NOZZLE CHECK in the TESTPRINT menuAIn the TEST PRINT menu, press the /button to select NOZZLE C
Premium Semigloss Photo Paper (170)Size Borderless Auto Wind *2 Core diameterForward Backward420 mm 16.5" Impossible Y Y 2"610 mm 24" R
Enhanced Adhesive Synthetic PaperSize Borderless Auto Wind *2 Core diameterForward Backward610 mm 24" Possible Y Y 2"1118 mm *1 44" *1I
Enhanced Matte PaperSize Borderless Auto Wind*2 Core diameterForward Backward432 mm 17" Possible Y N 3"610 mm 24"914 mm *1 36" *11
Singleweight Matte Paper (Line Drawing)Size Borderless Auto Wind *2 Core diameterForward Backward432 mm 17" Recommended Y *3 N 2"610 mm 24&q
Cut sheetPremium Glossy Photo PaperSize Borderless ThicknessSuper A3/B Possible 0.27 mmA2 ImpossibleUS-C PossibleICC profile Media type of the printer
Archival Matte Paper/Enhanced Matte PaperSize Borderless ThicknessSuper A3/B Possible 0.26 mmA2 ImpossibleUS-C PossibleICC profile Media type of the p
Where To Get HelpTechnical Support WebSiteEpson’s Technical Support Web Site provides helpwith problems that cannot be solved using thetroubleshooting
Help for Users in North AmericaEpson provides the technical support services listedbelow.Internet SupportVisit Epson’s support website at http://epson
We encourage you to have all the relevant informationon hand when you ring. The more information youprepare, the faster we can help solve the problem.
Bandung Lippo Center 8th floorJl. Gatot Subroto No.2BandungPhone/Fax: (62) 22-7303766Surabaya Hitech Mall lt IIB No. 12Jl. Kusuma Bangsa 116 – 118Sura
Menu listMenu Item Parameter“PRINTER SETUP” onpage 20PLATEN GAP NARROW, STANDARD, WIDE, WIDER, WIDESTPAGE LINE ON, OFFROLL PAPER MARGIN DEFAULT, TOP/B
Epson India Head Office - BangalorePhone: 080-30515000Fax: 30515005Epson India Regional Offices:Location TelephonenumberFax numberMumbai 022-28261515
Product InformationSystem Requirements forthe Printer DriverYour computer should meet the following systemrequirements to use the printer driver:Syste
Printer SpecificationsPrintingPrintingmethodOn-demand ink jetNozzleconfigurationBlack: 720 nozzles × 2(Photo Black, Matte Black)Color: 720 nozzles × 3
ElectricalRated voltageAC 100-240 VRatedfrequency range50 to 60 HzRated current Epson Stylus Pro 9700/9710: 1.0 to 0.5 AEpson Stylus Pro 7700/7710: 1.
Note:❏ The ink cartridges packaged with your printer arepartly used during initial setup. In order toproduce high-quality prints, the print head inyou
Standards and ApprovalsSafetyUL 60950-1CSA C22.2 No.60950-1Low Voltage Directive2006/95/ECEN 60950-1EMCFCC part 15 subpart B Class BCAN/CSA-CEI/IEC CI
IndexAAC inlet...10Adapter holder...
OOption interface connector...10PPage line...
“PAPER SETUP” onpage 24ROLL PAPER REMAINING REMAINING PAPER SETUPROLL PAPER LENGTHROLL LENGTH ALERTPAPER TYPE Photo PaperMatte PaperPlain PaperOthersC
Copyrights and TrademarksNo part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, elec
Details of Menu modePRINTER SETUP* Default settingsItem Parameter ExplanationPLATEN GAP NARROW You can adjust the distance between the print head and
Item Parameter ExplanationPAPER SIZE CHECK ON * You can select whether to check the paper width.❏ ON: Check the paper width and top edge of the paper.
TEST PRINT Item Parameter ExplanationNOZZLE CHECK PRINT You can print a print head nozzle check pattern for each inkcartridge. See “Nozzle check” on p
PRINTER STATUS This menu shows the printer status.Item Parameter ExplanationVERSION KW0xxxx or KN0xxxx You can see the firmware version.INK LEVEL (ink
PAPER SETUPWhen you use non-Epson media, be sure to make the appropriate settings for the paper.Item Parameter ExplanationROLL PAPER REMAINING REMAINI
CUSTOM PAPER SETUP When you use non-Epson media, you need to make settings suitable for the media.After you have selected the paper number, make the f
HEAD ALIGNMENT You can perform print head alignment. For more details, see the following section. “Print head alignment” on page 79Item Parameter Expl
Maintenance ModeYou can change the language or unit used on thedisplay or return all the setting values to their factorydefault.ATurn off the printer
Paper HandlingSupported MediaWe recommend you use Epson special media that canenhance the usage and expressive power of theprinting results. See the f
Using Roll PaperLoading roll paperTo load roll paper, follow the steps below.Note:❏ When REMAINING PAPER SETUP is ON, thebarcode (including the paper
ContentsCopyrights and TrademarksSafety InstructionsImportant Safety Instructions... 6Warning, Cautions, and Notes... 6When
ESwitch the lever of the roll media adapter to fitthe core size of the roll paper.Using 2-inch core:Using 3-inch core:FRelease the lock lever of the a
ISlide the adapter holder with the handle tomake the left roll media adapter align with on the adapter holder.JRoll the roll paper slowly into the rol
NInsert the paper into the insertion slot. Pull thepaper down through the paper insertion slot sothat it comes out below.Take care not to fold the edg
Cutting the roll paperThere are two ways to cut the roll paper.Method OperationAuto cut Cut the roll paper after printing each pageautomatically.Manua
Removing the roll paperNote:We recommend that you remove the roll paper fromthe printer after printing. If the paper roll is left in theprinter, the r
DTo unlock the adapter holder, push the locklever of the adapter holder down firmly. Movethe adapter holder to the left with the handleuntil the end.
Using Cut Sheet MediaThe procedures differ depending on your paper sizeand thickness.Paper Refer toSmaller than A3size “Loading cut sheet smallerthan
DLoad the sheet into the paper insertion slotuntil it meets resistance.Align the right edge of the paper with thesetting position, and then insert the
ELoad the sheet into the paper insertion slot.FMake sure that the right and bottom edges ofthe sheet are straight and in line with the set line.If you
Ejecting PaperThis section explains how to eject paper after printing.Note:When you use the paper basket, see the followingsection. “Using the paper b
Cleaning the Printer... 82Cleaning outside of the printer... 82Cleaning inside of the printer... 82Keeping t
Using the paper basket and paper guidesTo avoid your prints getting dirty or crinkled, set thepaper basket as explained below. The feedingdirection is
DBring the paper basket to the vertical position.This makes the basket cloth tight.EIn order to parallelize the basket cloth, movethe paper guides.Whe
CMove the paper guides to the vertical position,and then bring the front basket back as far as itgoes.DBring the front paper basket up and fasten itwi
Tilt the front basket until parallel to the floorwhen ejecting your prints.Note:When printing on Enhanced Matte Paper, you canstack plural prints on t
DTilt the paper guides.Using Auto Take-up Reel Unit (For Epson Stylus Pro 9700/9710 only)When you want to print your data on roll paper anddo not want
Control box1. Sensor lightDisplays the status of the Auto Take-up Reel Unit.Light StatusOn It is ready to use.Flashing rapidly It is operating.Flashin
GTape the leading edge of the roll paper to thetake-up reel core in three places.HPress the button to feed the paper forwardand create a loop of sla
Taking up your printsWhen the Auto Take-up Reel Unit is installed, and thetake-up reel core is loaded with paper to take up in thedesired direction, y
DRemove the take-up reel core from the flangeknob on the movable unit and the drive unit.cCaution:The paper roll is heavy so have two peoplehold it by
CRemove the flange by pinching the knob.DReverse the flange so that the smaller knob ispositioned on the outside, then replace it on themovable unit b
Printing with Layout Manager... 158Using Color Management... 159Color management by Driver ICM(Windows only)...
DTurn the lock lever to the front to lock themovable unit.Make sure the take-up reel unit is lockedproperly and firmly.Printable areaARollpaperThe min
Parameter A B-L B-R CTOP/BOTTOM15mm15mm 3mm 3mm 15mmTOP35/BOTTOM15mm35mm 3mm 3mm 15mmTOP45/BOTTOM15mm45mm 3mm 3mm 15mm15mm 15mm 15mm 15mm 15mm3mm 3mm
Basic SettingsPrint SettingsThis section describes how to print your data from anapplication using the Epson printer driver.Printing procedures (Windo
ESelect the paper source and paper sizeaccording to the paper loaded in the printer.After making the settings, click OK.Make sure to select the same p
Selecting the paper sizePaper Size *XXXX is the paper size. ExplanationRollpaperXXXX Roll Paper - Banner Select this size when using a banner printing
Paper Size *XXXX is the paper size. ExplanationCut sheet XXXX Sheet - Borderless (Auto Expand) Select this size when performing borderless printing on
Making the printer driver settingsATurn on the printer, and set the paper in theprinter. See “Paper Handling” on page 28BClick Print on the File menu
Checking the printer statusFor WindowsThe Progress Meter appears on your display when youstart printing. It indicates the progress of the currentprint
Canceling PrintingThere are a few ways to stop the print operationdepending on the situation.While sending dataCancelusingcomputerCancelusingprinterOp
Canceling printing using the computer (Mac OS X)AClick the Printer icon in the Dock.BSelect the job you want to delete, and then clickthe Delete butto
Safety InstructionsImportant SafetyInstructionsRead all of these instructions before using the printer.Also be sure to follow all warnings and instruc
Options and Consumable ProductsThe following consumable products are available for use with your printer (as of May, 2009).For the latest information,
Note:❏ When using the USB connection and a USB hub, we recommend that you connect the printer to the first hubconnected directly to the computer. Also
MaintenanceDaily MaintenanceInstructions for placing the printerObserve the following when setting up the printer:❏ Choose a flat and stable location
❏ Do not lose the paper package so you can use itfor storing the paper.Notes for after printingSee the instructions below for after printing.❏ Do not
Replacing Ink CartridgesNote:When you replace the ink cartridges while the printeris turned off, the remaining ink cannot be detectedcorrectly so the
Using the printer driverYou can check the amount of ink remaining on yourcomputer by using EPSON Status Monitor.For WindowsOpen the printer driver win
About ink cartridgesBe sure to use the ink cartridges that are supportedwith this printer. See “Options and Consumable Products” on page60Note:A prot
Replacing ink cartridgesAMake sure the printer is on.BPress the button.Note:The button is not available whileprinting or cleaning.CPress the / bu
cCaution:Do not touch the green chip on the side ofthe cartridge. Doing so may preventnormal operation and printing.HHold the ink cartridge with the a
Replacing the maintenance tankBe sure to use a maintenance tank that is supportedwith this printer. See “Options and Consumable Products” on page60cC
❏ If you use an extension cord with this product,make sure the total ampere rating of the devicesplugged into the extension cord does not exceedthe co
Replacing the CutterWhen the paper cutter does not cut cleanly, it may bedull and require replacement. See the followingsection for the product code o
Note:Put the used cutter in a bag or the like, anddispose of it in accordance with local regulations.ITake the new paper cutter out of the packageand
Adjusting the Print HeadYou may need to adjust the print head if white lines appear in your printed data or if you notice the print qualityhas decline
Nozzle checkThis function checks the print head*1 nozzles*2 forclogging by printing a nozzle check pattern. Performhead cleaning if you find that the
ECheck if there are missing dots on the nozzlecheck pattern.If there are no missing dots, click Finish.If there are missing dots, click Clean.After pr
Head cleaningIf you find that the printed data is unexpectedly faintor dots in the printed data are missing, you may beable to solve these problems by
DClick Print Nozzle Check Pattern in the HeadCleaning dialog box.Confirm the nozzle check pattern. See “Nozzle check” on page 73Cleaning the print hea
Note:❏ If the nozzles are still clogged aftercleaning the print head a few times,perform power cleaning. See “Power cleaning” on page 77❏ Power cleani
Automatic maintenance functionThis printer has a self-cleaning function and cappingfunction for maintaining the print head inconsistently good conditi
Print head alignmentTo prevent deterioration of print quality caused bymisalignment of the print head, align the print headbefore you start printing y
When handling the ink cartridges❏ Keep ink cartridges out of the reach of childrenand do not drink.❏ If ink gets on your skin, wash it off with soap a
Aligning the print head using thecontrol panelSelect AUTO to correct any head misalignmentautomatically to obtain optimum printing results. If you sel
Aligning the print head manuallyBecause there is a distance between the print head andpaper, the misalignment may occur by the humidityor temperature
Cleaning the PrinterTo keep your printer in top operating condition, cleanit thoroughly if it becomes soiled.cCaution:Take care to prevent water or ot
COpen the front cover and use a soft, clean clothto carefully clean away any dust or dirt insidethe printer.Wipe the gray part by following the direct
Keeping the PrinterWhen storing the printer, place it on a horizontalsurface with the ink cartridges installed in the printer.cCaution:The printer mus
Transporting the PrinterWhen transporting the printer, repack the printerusing the original box and packing materials toprotect from shock and vibrati
Setting up the printer after transportingThe steps you need to take to set up the printer aftertransporting it are almost identical to the steps carri
Problem SolverError Messages on the LCD PanelError messagesMessages are either status messages or error messages. Many common printer problems can be
Error messages Description What to doPAPER ERRORLOAD PAPER CORRECTLYREFER TO THE MANUALThe paper is not loadedcorrectly.Press the button to release t
Error messages related to the printerError messages Description What to doFRONT COVER OPENCLOSE FRONT COVERThe front cover is open. Close the front co
IntroductionFeaturesEpson Stylus Pro 9700/9710 and Epson Stylus Pro7700/7710 are wide-format ink jet color printerssupporting 44-inch and 24-inch pape
Error messages related to the maintenanceError messages Description What to doPAPER SENSOR ERRORPRESS THE BUTTONLOAD THE CORRECT PAPERREFER TO THE MA
Error messages Description What to doINK LOW The ink cartridge is nearlyexpended.Replacement of the ink cartridge is nearly needed. See “About ink car
Error messages Description What to doINK CARTRIDGEPLEASE USE GENUINE EPSON INKCARTRIDGESNon-genuine ink cartridgeis installed.Replace the ink cartridg
Error messages Description What to doTAKE-UP ERRORIS ANYTHING OBSTRUCTING THETAKE-UP REEL SENSOR SYSTEM? LOAD PAPER AGAINThe Auto Take-up Reel Unitdoe
TroubleshootingYou cannot print (because the printer does not work)Cause What to doThe printer does not turn on.Is the power cord plugged into the ele
Cause What to doThe printer is not correctlyconnected to the computer.Is the cable plugged properly?Make sure the printer’s interface cable is securel
Cause What to doThe printer stops printing.Is the status of print queue "paused"? (Windows)If you stop printing or the printer stops printin
The printer sounds like it is printing, but nothing printsCause What to doThe print head moves, butnothing prints.orThe nozzle check pattern is notpri
The prints are not what you expectedCause What to doPrint quality is poor, uneven, toolight, or too dark.Are the print head nozzles clogged?If the noz
Cause What to doPrint quality is poor, uneven, toolight, or too dark.Have you compared the printing result with the image on the display monitor?Since
Comments to this Manuals