Epson PowerLite home cinema 3010e User's Guide download pdf (Page 2)

Quick Setup

Before using the projector, make sure you read the safety instructions in the

online User’s Guide.

Choose a location

Keep the projector level and place it at a height where its lens is centered

between the top and bottom of the screen. If this isn’t possible, use the

horizontal keystone slider and keystone correction buttons to reposition the

image (see “Adjust the image”).

In order to view 3D images correctly, 3D glasses must be worn within proper

range of the projector. Use the image below to determine the ideal distance for

3D projection (the shading represents the 3D viewing area):

60º

16.5 ft (5 m)

13 ft (4 m)

Use the optional external 3D emitter if the projector is located over

16.5 feet (5 m) from the viewing area. See “Optional accessories” on the back

of this sheet for ordering information, and the online User’s Guide for more

information on where to place your projector.

Connect the projector

Choose from the following connections. See the sections below or the online

User's Guide for details.

Video Device

Connect up to 5 video devices and use the Source buttons on the projector or

remote control to switch between them.

Component video cable

Audio cable

RCA Video cable

Audio cable

HDMI cable

Computer

VGA cable

HDMI cable

Monitor Port

Connect one end of a VGA cable to the projector’s PC port, and the other end

to your computer’s monitor port. If you are using a laptop, switch it to

external display (see “Troubleshooting”). You can also connect an audio cable.

HDMI Port

Connect one end of an HDMI cable to the projector’s HDMI port and the other

end to an HDMI port on your computer.

Camera or USB Device

Connect a digital camera, USB flash drive, or USB storage device to the

projector’s USB port.USB port.

If you connect a digital camera, USB flash drive, or USB storage device, you can

use the projector’s Slideshow feature to project images. See the online User’s

Guide for details.

Turn on your equipment

Turn on your video source or computer.

Plug in the projector. The power button on the projector turns blue.

Remove the lens cap.

Press the power button on the projector or On button on the remote

control. The power light flashes blue, and then stays on.

Note: To shut down the projector, press the power button on the

projector twice or the Standby button on the remote control, then

unplug it. You don’t have to wait for the projector to cool down.

The default language of the menu system is English. To select another

language, press the Menu button on the remote control. Select Extended

and press Enter. Select Language and press Enter. Select your language

and press Enter. Press the Menu button to exit the menu system.

Adjust the image

If you don’t see an image, press the Source buttons on the projector or

the remote control to select the image source.

Note: If you still see a blank screen or have other display problems, see

the troubleshooting tips on the back of this sheet.

To raise the image, adjust the front feet as shown below.

Turn the zoom ring to reduce or enlarge the image.

Turn the focus ring to sharpen the image.

If your image looks like or , you’ve placed the projector off to

one side of the screen at an angle. Use the horizontal keystone slider on

the projector to correct it. Or place the projector directly in front of the

center of the screen, facing the screen squarely.

Your projector automatically adjusts images that look like or ,

but if necessary you can press the or buttons on the projector to

correct this.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).

Choose which source

to display

Turn projector on

Access projector

menus

Turn off projector

display

Navigate projector

menus

Turn projector off

Switch between

2D and 3D

For more information on using the remote control, see the online User’s

Guide.

Project wirelessly

(PowerLite Home Cinema 3010e only)

Follow these steps to use the included WirelessHD Transmitter (PowerLite

Home Cinema 3010e only) to wirelessly transmit HD content to your projector.

Place the transmitter within 30 feet (10 m) of the projector. Make sure

the front of the transmitter faces the front of the projector. See the

online User’s Guide for more information on the WirelessHD transmission

range.

Note: Do not place the transmitter on a metal surface, as this may

interfere with the signal.

Plug the AC adapter into the transmitter and a wall outlet.

Connect an HDMI cable to your video device and the HDMI port on the

side of the transmitter.

Turn on the power switch on the back of the transmitter.

Turn on your video device and begin playback.

Turn on the projector.

Press the button on the projector remote control.

See the online User’s Guide for more information on adjusting and configuring

the WirelessHD connection.

PowerLite

Home Cinema 3010/3010e

*412153700*

1 2 3 4

Comments to this Manuals

No comments

Epson PowerLite home cinema 3010e User's Guide Page 2

Comments to this Manuals

Related products and manuals for Serial switch boxes Epson PowerLite home cinema 3010e