Epson PS-100 User's Guide Page 1

PS-100 User’s Guide

What’s in the box Contact your reseller if there are any missing or damaged components. PS-100 Charging Cradle Quick Start Guide Options You

Getting started Recording your data ! Important To record your data it is necessary to register your device with the PULSENSE View smart device appl

! Important Ensure the PS-100 is oriented in the cradle correctly. 2 Charging the product. Set up and basic operation • 12

2-1 Using a PC Insert the cradle's USB cable into a free USB port on your PC. If you are connecting the cradle via a USB hub it may not charge.

4 Remove the product from the cradle. Press the small tab down and push the PS-100 out from the back. The product is ready for Bluetooth pairing w

Wearing the PS-100 When wearing the product, make sure it does not touch the ulna bone on your wrist. Note: The Pulsense band needs to be worn snugl

4 Insert the band fastener into the hole number you checked in step 2. 5 Put your hand through the wristband and fasten the buckle. When wearing t

Initial configuration Smart device user 1 Search your smart device's app store for Epson PULSENSE View (free), and then install it. Make sure

3 Set up your PULSENSE View account by following the on-screen instructions. Once you have created your account and completed your profile, follow

Pairing issues When using the product for the first time, check the following: 1. Attach the PS-100 to the cradle to wake the PS-100 from battery p

Introduction Thank you for purchasing the PS-100. To use the device, make sure you read the User’s Guide and the Quick Start guide. Trademarks EPSON

Using your PS-100 This product measures heart rate and activity 24 hours a day, tracking your steps, distance, calories, sleep quality, and heart r

Heart rate measurement Heart rate detection 1 Heart rate detection starts when the product is moved and the LEDs flash in sequence as shown below.

When the heart rate can’t be detected LED Issue How to solve The device is not being worn correctly onto your wrist. Wear the product closely around

50～59% ↑ ↑ ↑ - 60～69% ↑ ↑ ↑ - 70～79% ↑ ↑ ↑ - 80～89% ↑ ↑ ↑ - Above 90% Blinking (Faster) - Note: You can check your real time heart

How to stop and resume heart rate measurement Heart rate detection stops if the product is not worn and has not been moved for three minutes. Heart

Low battery notification If the battery level is low, the orange LED will flash every 4 seconds. Once the remaining battery level is down to 1 hou

Airplane mode Wireless communication must be turned OFF during a flight. Set the product to Airplane Mode before take-off. When transporting the prod

Turn off airplane mode 1 Repeatedly tap the face of the product. The LEDs will light up and display the pattern below to confirm it is still in Air

Additional functions “Notification Settings” on page 29 “Wake-up Alarm” on page 29 Additional functions • 28

Notification settings Depending on your settings, the product can alert you by vibration and LEDs when you receive an E-mail, call, or calendar notif

Viewing data Log onto PULSENSE View for iOS or Android on your smart device. Log onto the PULSENSE View web application. Note: To charge the PS-10

Maintenance “Looking after your device” on page 31 “Replacing the Battery” on page 31 “Updating the Firmware” on page 31 Maintenance • 30

Looking after your device Clean the PS-100 regularly. Wipe your product with a damp cloth, remove the moisture with a towel, then let it air dry. !

Troubleshooting This section explains how to solve problems that occur during use. “Caution” on page 33 “Problem Solving” on page 34 “System Reset”

Caution ・ To avoid the possibility of skin irritation or discomfort from wearing the PS-100, you must keep the skin under the band clean and dry at

Problem solving Check each item. Problem Solution LED is not ON or Flashing. Before charging, the PS-100 is in battery protection mode. Put the pro

System Reset If device operations become unstable, perform a system reset by connecting the product to the cradle. Charging resets the system, and r

Where to get help Internet support Visit epson.com/support/ps100 (U.S.) or epson.ca/support/ps100 (Canada) for solutions to common problems. You can

Appendix “Product Specification” on page 32 Appendix • 37

Product specification Device specifications Contents Specification Model PS-100 Size (LxWxH) 1.77 in ｘ 0.87 in ｘ 0.49 in (excluding sensor unit） 45

CPD-42360 SEC PN: 412834700 Appendix • 39

Contents Introduction 2 Description in the User’s Manual ... 2 Tradem

Appendix 32 Product Specification ... 32 Device Specif

Using this device safely Make sure you read the documentation (Quick Start guide and User’s Guide) first before using this product safely. The produ

Notes on using the product and components Warning Exercise according to your physical capabilities. Stop exercising and consult your doctor if yo

Note: Please note that even if not in use, the PS-100 should be charged at least once within a 6 month period. Failing to do so might affect the perfo

Set up and basic operation Follow these instructions to use your device: “Things You Can Do with the Product” on page 10 “What’s in the box” on pa