Epson Perfection 1200U User Manual download pdf (Page 68)

Using the Transparency Unit

Loading Transparencies

Before scanning transparencies, wipe the

lid of the transparency unit, the scanners

document table glass, and the narrow

window near the hinges. Be sure to keep

the window uncovered when loading your

transparencies. If your transparency

obstructs the window, the colors in your

scans will be affected.

You can load transparencies in the film

holders or you can place them directly on

the document table, as described in the

following sections.

Using Film Holders

Three film holders are included with the transparency unit. To place film in the

holders, see the instructions for the type of film youre scanning. To remove a film

holder from the document table, lift it out by its tab.

Hold the film by the edges or use gloves. Touching the film

surface with bare hands can leave fingerprints or other marks

on the film.

Placing the Film

Film has two sides, a base side that is shiny and a dull side with the emulsion. The

base side of the film has the film makers name and film ID numbers printed on it.

Film should always be loaded in the film holders or placed on the document table

with the base side down.

window

lid

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 112 113

No comments

Epson Perfection 1200U User Manual Page 68