DM-D500Installation Guide401467400
8 DM-D500 Installation GuideEnglish5. Connect the cable for the DM-D500 to the DM connector on the TM printer as shown in illustration 17.Attaching
DM-D500 Installation Guide 9EnglishAssembling1. Pass the cable for the DM-D500 through support C, and attach support C to the DM-D500 as shown in i
10 DM-D500 Installation GuideEnglish4. Connect the cable for the DM-D500 to the DM connector on the TM printer as shown in illustration 26.5. Adjus
DM-D500 Installation Guide 11EnglishRequired itemsThe items shown in illustration 30 are used to attach the DM-D500 to TM-H6000 or TM-U675 printers
12 DM-D500 Installation GuideEnglish2. Attach the rubber feet to the printer as shown in illustration 33.3. Attach fixing plate B to the printer as
DM-D500 Installation Guide 13English7. The horizontal rotation mechanism of fixing plate A can be adjusted. To secure the location of the display,
14 DM-D500 Installation GuideEnglishNote:The roll paper cover may not open if the position of the display is not correct. Before securing the posit
DM-D500 Installation Guide 15EnglishRequired itemsThe items shown in illustration 45 are used to attach a DM-D500 to a TM-T88II, TM-U210, TM-U230,
16 DM-D500 Installation GuideEnglish3. Pass the cable for the customer display through the support, and attach the support to the display as shown
DM-D500 Installation Guide 17English5. Peel the backing off of one side of the Velcro tapes, and attach the tapes to both faces of the fixing plate
EnglishAll rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, e
18 DM-D500 Installation GuideEnglish8. Place the TM printer on the fixing plate. (See the table below for the mounting position for each TM printer
DM-D500 Installation Guide 19EnglishRequired itemsThe items shown in illustration 54 are used when the DM-D500 is used with other TM printers. Thes
20 DM-D500 Installation GuideEnglish3. Pass the cable for the DM-D500 through the hole on fixing plate A, and fix the cable at the bottom as shown
DM-D500 Installation Guide 21EnglishAttaching to the DM-D StandThe DM-D500 can be attached directly to the DM-D stand using the “DM-D stand unit fo
22 DM-D500 Installation GuideEnglishConnectors for the DM-D standThe connectors for the DM-D stand are shown in illustration 65.Note:The DM-D stand
DM-D500 Installation Guide 23EnglishThe jumpers are located as shown in illustration 67.Precautions on using the power supply unitTo avoid damage t
24 DM-D500 Installation GuideEnglish2. Insert the tab on the DM-D500 (or the extension support) into the hole on the DM-D stand as shown in illustr
DM-D500 Installation Guide 25English5. If using the unit as a standalone, go to step 6. When using the DM stand with the printer, connect one end o
26 DM-D500 Installation GuideEnglish7. Connect the DC cable of the power supply unit (with the arrow mark up) to the power supply unit connector in
DM-D500 Installation Guide 27EnglishPart Names and FunctionsExterior❏ Display: Characters are displayed.❏ Power switch: The power is turned on/off.
DM-D500 Installation Guide 1EnglishSafety PrecautionsThis section presents important information intended to ensure safe and effective use of this
28 DM-D500 Installation GuideEnglishDIP SwitchDIP Switch FunctionsThe DM-D500 has two groups of DIP switches. The functions of the DIP switches are
DM-D500 Installation Guide 29EnglishDIP switch 2(*1) The “Y-connection enable” is set when a TM printer with no modular jack for the DM-D is connec
30 DM-D500 Installation GuideEnglish2. Remove the DIP switch cover as shown in illustration 79.3. Change each setting of the switches with a pointe
DM-D500 Installation Guide 31EnglishSelf TestThe DM-D500 has a self test function. If you want to perform a self test, you must change the setting
32 DM-D500 Installation GuideEnglishSpecificationsTilt angle Max. 48° (4 steps, 5 positions)Horizontal rotation Max. 90° (for each left and right a
DM-D500 Installation Guide 33English213 mm {8.4"}83 mm {3.3"}65 mm {2.6"}51 mm {2.0"}118 mm {4.7"}200 mm {7.9"}90°48°
34 DM-D500 Installation GuideEnglishDM-D pole unit for IR Series (DP-504)<DM-D pole units>DM-D pole unit for TM printer (Type B)(DP-503)DM-D
2001.07
2 DM-D500 Installation GuideEnglishUnpackingThe items shown in illustration 1 are in the box.Make sure that you have all the items shown, and that
DM-D500 Installation Guide 3English❏ TM-H5000II and TM-J8000 printers. You can attach the DM-D500 to TM-H5000II and TM-J8000 printers using the “DM
4 DM-D500 Installation GuideEnglish*1: If your printer is a TM-H5000, always purchase the latest model of the UB-S01 before using it with the DM-D5
DM-D500 Installation Guide 5EnglishRequired itemsThe items shown in illustration 4 are used to attach the DM-D500 to the IR Series. These items are
6 DM-D500 Installation GuideEnglish3. Pass the cable for the DM-D500 through the base as shown in illustration 8.4. Insert the tab on the base into
DM-D500 Installation Guide 7EnglishAssembling1. Pass the cable for the DM-D500 through support C, and attach support C to the DM-D500 as shown in i
Comments to this Manuals