Epson 955WH User's Guide download pdf (Page 169)

• Make sure the computer's display resolution does not exceed the projector's resolution and frequency

limit. If necessary, select a different display resolution for your computer. (See your computer manual

for details.)

• As a test, try setting the computer's display resolution to the lowest possible setting, and then

gradually increase it as necessary.

Parent topic: Solving Image or Sound Problems

Related references

Input Signal Settings - Signal Menu

Supported Video Display Formats

Solutions When Only a Partial Image Appears

If only a partial computer image appears, try the following solutions:

• Press the Auto button on the remote control to optimize the image signal.

• Try adjusting the image position using the Position menu setting.

• Press the Aspect button on the remote control to select a different image aspect ratio.

• If you zoomed into or out of the image using the E-Zoom buttons, press the Esc button until the

projector returns to a full display.

• Check the cables connecting the computer or video source to the projector. Try connecting different

cables.

• Check your computer display settings to disable dual display and set the resolution within the

projector's limits. (See your computer manual for details.)

• Check the resolution assigned to your presentation files to see if they are created for a different

resolution than you are projecting in. (See your software help for details.)

Parent topic: Solving Image or Sound Problems

Related references

Input Signal Settings - Signal Menu

Supported Video Display Formats

Solutions When the Image is Not Rectangular

If the projected image is not evenly rectangular, try the following solutions:

• Place the projector directly in front of the center of the screen, facing it squarely, if possible.

169

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 241 242

No comments

Epson 955WH User's Guide Page 169