Epson ELPDC04 User's Guide download pdf (Page 58)

EMP-S1 User’s GuideAppendices > Projector Care

Loosen the fixing screws holding the lamp in place.

Remove the old lamp.

Install the new lamp.

Press the lamp until it clicks into place, then tighten the two fixing

screws.

Replace the lamp cover.

First insert the tabs, and then press down on the opposite side until it

clicks into place.

• Install the lamp securely. If the lamp cover is removed, the

lamp turns off automatically as a safety precaution. The

lamp will not turn on if the lamp or the lamp cover is not

installed correctly.

• After replacing the lamp, be sure to reset the lamp

operating time.

• New air filters are included with replacement lamps. The

air filter should also be replaced when the lamp is replaced.

s "Lamp replacement period" P.56

• Dispose of used lamps properly in accordance with your

local regulations.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 72 73

No comments

Epson ELPDC04 User's Guide Page 58