Epson LQ-570+ User's Guide download pdf (Page 70)

Tear Off

Enter tear-off mode by performing the following steps:

1. Make sure the printer is turned off.

2. Turn DIP switch 2-3 on.

3. Turn the printer on.

When tear-off mode is on and you print on continuous paper on the

push tractor, the printer advances the final printed page to the tear-

off position. Then you can tear off all printed pages.

If the perforation is not aligned with the tear-off edge, adjust the

tear-off position as described in the section on adjusting the tear-off

position later in this chapter.

When you resume printing, the printer automatically feeds the paper

back to the loading position and begins printing. (You can also

manually feed the paper back to the loading position by pressing

the

LOAD/EJECT

TEAR OFF

button.)

Using the TEAR OFF button

Whether or not the printer is in tear-off mode, you can use the

TEAR OFF button to advance continuous paper to the tear-off

position by following the steps below.

Make sure printing has finished. Then press the TEAR OFF

button. The printer advances the paper to the tear-off edge and

the TEAR OFF light comes on.

Tear off all printed pages. If the perforation is not aligned with

the tear-off edge, adjust the tear-off position as described in the

next section.

When you resume printing, the printer automatically feeds the

paper back to the loading position and begins printing. (You can

also manually feed the paper back to the loading position by

pressing the LOAD/EJECT or TEAR OFF button.)

Using the Printer

3-17

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 152 153

No comments

Epson LQ-570+ User's Guide Page 70