Epson C80WN Bulletin

Page 1 of 6EPSON PRODUCT SUPPORT BULLETINDate:4/30/2003Originator:DSPSB #:PSB.2003.05.005Authorization:Reference:N/ATotal Pages:6Product(s):EpsonNet

browser, you will need to disable it temporarily in order to access the Web HOMEpage on the Access Point.5) Type in the address of the Access Point o

1) Change the Printer’s TCP/IP Settings.• Open the Printer properties and change the Port to "EPSON_LPR" and set the printers address

Page 1 of 3EPSON PRODUCT SUPPORT BULLETINDate:11/1/2002Originator:JAMPSB #:PSB.2003.01.005Authorization:Reference:N/ATotal Pages:3Product(s):Epson S

Page 2 of 3down button box.(Refer to Note #1 from above)3. Enter an encryption code in the “64Bit Key 1” box, for example - 3132333435 Or the “12

Page 3 of 3the UPDATE is sending the WEP key from the basestation to the server. The linkwill be re-established and the communications lights will re

Page 1 of 5EPSON PRODUCT SUPPORT BULLETINDate:11/1/2002Originator:JAMPSB #:PSB.2003.01.004Authorization:XXReference:N/ATotal Pages:5Product(s):Epson

Page 2 of 5To Begin:Power-up the Printer, Print Server, Access Point and Host Computer.On the Host Computer do the following:Note: The computer used f

Page 3 of 5Note: If your Access Point is also a DHCP Server, leave the Boot Method on Auto and the PrintServer will be assigned TCP/IP address setting

Page 4 of 54) Type in the address of the Base-Station (i.e. 192.168.0.1) on the address bar of theWEB browser and hit enter. Example… HTTP://192.168.

Page 5 of 5• In the Epson Stylus C80 Series Properties window:o Click the PORTS tabo In the PRINTER PORTS box, select STANDARD TCP/IP PORTo Click

Page 2 of 6TYPE: tftp <enter the IP address of the print server> then press RETURNExample: tftp 139.63.2.150, then press the RETURN key.

Page 1 of 5 EPSON PRODUCT SUPPORT BULLETIN Date: 11/1/2002 Originator: JAM PSB #: PSB.2003.01.003 Authorization: Reference: N/A Total Pages: 5

Page 2 of 5 To Begin: Power-up the Printer, Print Server, Access Point and Host Computer. On the Host Computer do the following: Note: The computer

Page 3 of 5 4) In the “Boot Method” drop-down button select STATIC (see Note below), then go to the TCP/IP address fields and enter the appropriate a

Page 4 of 5 3) Go the property settings of the Computer's Adapter Card. • Right click the WIRELESS icon found in the System Tray by the lower r

Page 5 of 5 9) Reboot the system and upon restart check the WIRELESS status monitor. 10) If there are collision errors, re-enter the WEP KEY value

EPSON PRODUCT SUPPORT BULLETIN Date: 11/1/2002 Originator: JAM PSB #: PSB.2003.01.002 Authorization: Reference: N/A Total Pages: 5 Product(s):

To Begin: Power-up the Printer, Print Server and Host Computer. On the Host Computer, do the following: 1) Disable WEP if it is on. 2) Install t

Subnet Mask: 255.255.255.0 Gateway IP: 192.168.0.1 >> 1 for the Access Point Note: If your Access Point is also a DHCP Server, leave the Bo

4) Use a WEB browser such as Internet Explorer to access the Access Point’s WEB HOME configuration page and set the WEP encryption to match the Print

Printer Driver Settings: 1) Change the Printer’s TCP/IP Settings. • Open the Printer properties and change the Port to "EPSON_LPR"

Page 3 of 6At the tftp> prompt type the word binary, then press RETURNExample: tftp> binary, then press the RETURN key.

Page 1 of 1EPSON PRODUCT SUPPORT BULLETINDate:03/27/2002Originator:DSPSB #:PSB.2002.03.003Authorization:Reference:N/ATotal Pages:1Product(s):Stylus

Page 4 of 6At the tftp> prompt type put <WLEP399.bin file name> then press RETURNExample: tftp> put WLEP399.bin, then press the RETURN key

Page 5 of 6During the update process, you will see a message on the screen at the TFTP prompt that anumber of bytes were sent. This means the update i

Page 6 of 67. Open the configuration page and confirm the settings are correct, change if necessary.8. Print the Configuration page. Click on the WP-A

EPSON PRODUCT SUPPORT BULLETINDate:11/1/2002Originator:JAMPSB #:PSB.2003.01.006Authorization:Reference:N/ATotal Pages:5Product(s):Epson Stylus C80WN

To Begin:Power-up the Printer, Print Server and Host Computer.On the Host Computer, do the following:1) Install, then Launch WP-Admin and click the &

7) Click the OK button to save the new settings and the changes will be written to thePrint Server. This may take 2-3 minutes. Wait for the utility