Epson Stylus Photo 700 User Manual download pdf

Instructional Manual Continuous Ink System for use in Epson Stylus Photo 700/710/720/750/EX/EX2/EX3

Before using this product, please read and follow all instructions. After opening your package, make sure to check that all the accessories

shown in figures 1-1 through 1-3 below.

Conduct Parts Check:

1. Accessories

a. Continuous Ink System (1) b. Cartridge covers and clamps (2 each) c. Air breather plugs (6)

d. Adhesive pads for tube attachment (8) e. Zip Ties (optional) (6) f. Syringe (1)

Fig.1-1 Fig 1-2 Fig 1-3

2. Set-Up Continuous Ink System (CIS)

a. Before installation, layout all your parts in front of your printer.

b. Check your system for any leakage, and make sure your tubing system is tightly bounded and straight as shown in (Fig. 1-1).

c. Place the CIS on the right hand side of the printer (Fig. 2-1) and keep it at the same level with the printer.

d. Hold down the ink tank with one hand, unplug the original air stopper (Fig. 2-2).

e. Insert the provided air breather plugs as shown (Fig. 2-3).

Fig 2-1 Fig 2-2 Fig 2-3

3. Cartridge and Cover Installation

a. Open printer cover and make sure cartridge compartment is on the left hand side and easily accessible (Fig 3-1).

b. Unplug the printer

c. Remove original cover (Fig 3-2).

Fig 3-1 Fig 3-2

d. Using a screw driver remove the metal portion in the cartridge compartment (Fig 3-3)

1 2 3

Page 1

1 Instructional Manual Continuous Ink System for use in Epson Stylus Photo 700/710/720/750/EX/EX2/EX3 Before using this product, please read and fo

Page 2

2 e. Insert clamp and replace metal portion to original position (Fig 3-4) f. Follow steps c to e for both cartridges (Fig 3-5) Fig 3-3

Page 3

3 When the ink levels reach the indicator margin (sticker on the ink tank with red line (fig5-1) the ink tank system has reached its quotient line

No comments

Epson Stylus Photo 700 User Manual