Epson Stylus Pro 10600 Print Engine with Photographic Dye Ink Bulletin

EPSON PRODUCT SUPPORT BULLETIN Date: 11/8/04 Originator:RB, CH, JD, SA PSB #: PSB.2004.03.001C Authorization: Reference: PSB.2004.03.001A Total Page

13. Click on General, then click the square on Reverse Order. 4. Click on Print. 10

NOTE 1: When enabled, the first page will be printed first, instead of the last page first. Or Change the orientation to “Reverse”, then you don’t h

Adobe Illustrator 8.x/9.x: In this example, we are creating a banner, which is 227 inches (Illustrators max. page setup). 1. Launch Illustrator and

5. Click on the Paper Tab. The following appears. 6. Set the Paper Source to Roll Paper (Banner) and also enable Save Roll Paper. 7. When c

8. After setting the custom page size and other driver settings (media type, resolution, etc.), click OK. This will bring you back to the docu

CorelDRAW: In this example, a banner is created at 227 inches. 1. Launch CorelDRAW and open or place an image in your page layout. 2. Adjust the

4. Click on the Paper Tab. The following appears. 5. Set the Paper Source to Roll Paper (Banner) and also enable Save Roll Paper. 16

6. When creating the custom page size, divide the banner size by a value that will make it less than the printer maximum custom page size. In this

8. At this point, click File then Print. CorelDRAW will then run a pre-flight check and will show the following window. 18

9. Click on the Layout Tab and enable Print Tiled Pages and set any additional parameters as you see fit. 10. At this point you could check o

2Maximum custom page size allowable for EPSON PostScript options (PPD): Stylus Color 3000 Stylus Pro 4000 Stylus Pro 5000 Stylus Pro 5500 Stylus Pr

EPSON Professional Graphics Group Page 1.EPSON PRODUCT SUPPORT BULLETINDate: 07/03/03 Originator: Bulletin #: PSB.2003.05.001B Authorization:Referen

EPSON Professional Graphics Group Page 2.INSTALLING THE DRIVER1. After the driver is downloaded to your desktop a new folder is created (example: ep

EPSON Professional Graphics Group Page 3.4. The installer requires your Macintosh password for Authentication. Enter your Password and click OK.5. T

EPSON Professional Graphics Group Page 4.7. Select the Destination Disk (your OS X volume) to install the driver on by clicking on its icon, then cl

EPSON Professional Graphics Group Page 5.ADDING THE PRINTER TO PRINT CENTER1. After the printer driver is installed you first need to register it wi

EPSON Professional Graphics Group Page 6.5. After you choose the Epson Interface Connection, the Print Center automatically searches the connection

EPSON Professional Graphics Group Page 7.7. To add or remove information displayed about the printer go to the View Menu and select Columns the choo

EPSON Professional Graphics Group Page 8.10. To view the Job Status of a printer double click on it in the Printer List to display its information a

EPSON Professional Graphics Group Page 9.EPSON PRINTER UTILITY1. You can access the Epson Printer Utility from the Print Center by: 1.1 First select

EPSON Professional Graphics Group Page 10.DRIVER REMOVALBefore installing a New Driver you must first properly remove the existing Driver and all of

* These applications allow for tiling of print pages, therefore allowing you to print beyond the printers maximum page length limit and print to the a

EPSON Professional Graphics Group Page 11.3. In the next steps you will be dragging Files or Folders to the Trash. OS X requires you to have proper

EPSON Professional Graphics Group Page 12.4.1.2 Drag the printers Preferences to the TRASH.4.2 The second option is to drag the entire Epson folder

1 EPSON Product Support Bulletin Date: 09/25/2002 Originator: MS PSB #: PSB.2002.09.004 Authorization: Reference: N/A Total Pages: Product(s): EP

2 2. Click on the Add button. Then select AppleTalk from the top sub-menu and your AppleTalk zone if applicable. 3. The Print Center should scan th

3 IP Printing Installation: 1. Open the Print Center, which can be found on your HDD under Applications - Utilities 2. Click on the Add button

4 4. Navigate to the location of your PPD file. After selecting the PPD file it should reflect the name of the printer under the Printer Model secti

For Windows Users, if you encounter partial/incomeplete prints while having Finest Detail enabled, please disable this setting. It is recommended fo

Adobe Illustrator CS: In this example, we are creating a banner, which is 227 inches (Illustrators max. page setup). NOTE: Mac O/S 10.3.3 system i

3. Click on File, Print, click Setup, under Tiling click on the drop down arrow, select Tile Full 4. Pages and click the Printer button. 5.

7. Then click on Print. This will bring you back to the Print window. 8. This time click on Page Setup, you see the following screen, just click

9. When Page Setup is open, click on the down arrow for Custom Paper Size. NOTE: When creating the custom page size, divide the banner size by a va

11. Under Paper Size, click on the drop down arrow and select the custom paper size you created (i.e. 20 X 180) orientation is set to portrait mod