Epson L1455 User Manual Page 137

  • Download
  • Add to my manuals
  • Print
  • Page
    / 233
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 136
Replacing a Maintenance Box
In some print cycles a very small amount of surplus ink may be collected in the maintenance box. To prevent ink
leakage from the maintenance box, the printer is designed to stop printing when the absorbing capacity of the
maintenance box has reached its limit. Whether and how oen this is required will vary according to the number
of pages you print, the type of material that you print and the number of cleaning cycles that the printer performs.
Replace the maintenance box when you are promoted to do so. e Epson Status Monitor, your LCD, or lights on
the control panel will advise you when this part needs replacing. e need for replacement of the box does not
mean that your printer has ceased to operate in accordance with its specications. e Epson warranty does not
cover the cost of this replacement. It is a user-serviceable part.
Note:
When it is full, you cannot print until the maintenance box is replaced to avoid ink leakage. However, you can perform
operations such as sending faxes and saving data to an external USB device.
1. Remove the new maintenance box from its package.
c
Important:
Do not touch the green chip on the side of the maintenance box. Doing so may prevent normal operation and
printing.
Note:
A transparent bag for the used maintenance box is provided with the new maintenance box.
2. Open rear cover 1.
3. Remove the used maintenance box.
User's Guide
Relling Ink and Replacing Maintenance Boxes
137
Page view 136
1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 232 233

Comments to this Manuals

No comments