Epson ActionPC 7300 User's Guide download pdf (Page 67)

Push the SIMM into the socket until it is seated firmly in the

slot. Then tilt it upright, as shown below, guiding the hole

at each end of the SIMM over the retaining post at each end

of the SIMM socket. If it does not go in smoothly, do not

force it; pull it all the way out and try again.

Replace any option cards you removed. (See page 4-16 for

instructions.)

Removing SIMMs

If you need to remove SIMMs from your computer (to install

different ones, for example), make sure the computer is turned

off and then follow the steps below:

Use the illustration on page 4-5 to locate the SIMM sockets

on the right of the system board near the power supply

connector.

Remove any option cards that may be blocking your access

to the SIMM sockets. (See page 4-19 for instructions.)

4-14

Installing and Removing Options

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 152 153

No comments

Epson ActionPC 7300 User's Guide Page 67