Epson 4600 Specifications download pdf (Page 12)

Epson Stylus CX4600

12 - Epson Stylus CX4600 6/04

3. Press and release the B ink button. The ink cartridge holder

moves to the check position and the

On and B ink lights

flash. If one of the cartridges is low or empty, the CX4600

moves that cartridge to the _ ink out mark.

Note:

Do not hold down the

B ink button; when held down for 3 or

more seconds, it tells the printer to start cleaning the print head.

Caution:

Do not move the print head by hand; this may damage the

CX4600. Always press the

B ink button to move it.

4. Press the B ink button again.

❏ If more than one cartridge is empty or low, the next

cartridge moves to the _ ink out mark.

❏ If all of the empty or low ink cartridges have been

identified, the print head moves to the ink cartridge

replacement position when you press the B ink button.

5. Open the cartridge cover and squeeze the tab at the back of

the empty/low cartridge and lift it straight out. Dispose of it

carefully. Do not take the used cartridge apart or try to

refill it.

WARNING:

If ink gets on your hands, wash them thoroughly with soap and

water. If ink gets into your eyes, flush them immediately with

water.

6. Before you open the new ink cartridge package, shake it

four or five times. Then remove it from the package.

Caution:

Do not remove or tear the label on the cartridge; otherwise, ink

will leak.

Do not touch the green chip on the side of the cartridge. This can

damage the ink cartridge.

7. Insert the new ink cartridge and push it down until it clicks

into place.

8. Replace any other cartridges that need to be replaced.

Do not touch this part

Do not damage the tab

1 2 ... 7 8 9 10 11 12 13

No comments

Epson 4600 Specifications Page 12