EPSON Stylus Photo 780
8 -
EPSON Stylus Photo 780 1/01
6. Tilt the new cartridge forward slightly as you place it in its
holder.
Locate the tabs at the back of the cartridge. Rest the tabs on
top of the hooks on the ink cartridge clamp. Make sure the
tabs are positioned above the hooks..
Don’t place the cartridge under
the hooks; you may damage the
clamp when you close it.
7. Press down the ink cartridge clamp
until it locks in place.
8. If you need to replace the other ink cartridge, repeat steps 3
through 7 before continuing with step 9.
9. Press the e ink cartridge replacement button and close the
printer cover. The printer begins charging the ink delivery
system.
The Ppower light flashes, and the printer makes noise.
Charging takes about one minute. When it’s finished, the
Ppower light stops flashing and stays on and the
b
error
light goes out.
Never turn off the printer while the Ppower light is
flashing, unless the printer hasn’t moved or made
noise for more than 5 minutes.
Cleaning the Print Head
If your printouts are unexpectedly light or faint, or dots or
lines are missing from the image, you may need to clean the
print head. This unclogs the nozzles so they can deliver ink
properly. Print head cleaning uses ink, so clean it only if
quality declines.
This section explains how to clean the print head using the
Head Cleaning utility, which is the recommended method
when the printer is connected to a local port, not over a
network.
You can also clean the print head by holding down the
b
maintenance button on the printer’s control panel for
three seconds when the
b
error light is off. See your Fix-it
Flix
SM
movies or your electronic Reference Guide for detailed
instructions.
When you don’t turn on your printer for a long time, the
print quality can decline. It’s a good idea to turn on your
printer at least once a month to maintain good print
quality.
Follow these steps to run the Head Cleaning utility:
1. Make sure the printer is turned on but not printing, and the
b
error light is off. (If the
b
error light is flashing or on,
you may need to replace the ink cartridge; see page 7 for
details.)
2. If you have an application running, access the printer
settings dialog box.
Or, with Windows, click
Start
, point to
Settings
, and
select
Printers
. Right-click the
EPSON Stylus Photo 780
printer icon. Then select
Properties
(Windows 95, 98, or
Me),
Document Defaults
(Windows NT), or
Printing
Preferences
(Windows 2000).
3. Windows: Click the
Utility
tab.
Macintosh: Click the Utility button.
4. On the Utility menu, click the
Head Cleaning
button.
5. Follow the instructions on the screen to clean the print
head. Cleaning takes about 30 seconds, during which the
printer makes some noise and the Ppower light flashes.
Never turn off the printer while the Ppower light is
flashing, unless the printer hasn’t moved or made
noise for more than 5 minutes.
6. When the Ppower light stops flashing, run a nozzle check
to confirm the print head nozzles are clean.
Make sure paper is loaded in the printer and click
Print
nozzle check pattern
. Then click
Print
. The nozzle check
pattern prints (see the next section for details).
hooks
tabs
(10 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals