Epson C42UX User Manual download pdf (Page 28)

Maintaining Your Printer

5. Insert the new cartridge and press

down firmly on the clamp. Make sure

the clamp is closed completely.

6. Press the

(

maintenance button.

If the other cartridge needs to be

replaced, the print head moves into

loading postion. Repeat steps 4

through 6.

7. Wait until ink charging is finished. (The green

power light stops flashing and

the red

(

error light goes out.) Ink charging takes about 30 seconds.

8. Close the printer cover.

Now you’re ready to print again.

If the red

(

error light remains on and the printer continues to make noise for more

than five minutes, open the printer cover and press the

power button to turn the

printer off. Then make sure that the ink cartridge clamps are completely closed. Close

the printer cover and press the

(

maintenance button to finish ink charging. If that

doesn’t work, contact EPSON as described on page 46.

Maintenance

button

Don’t move the print head

by hand; you could damage

the printer. Always use the

(

maintenance button.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 58 59

No comments

Epson C42UX User Manual Page 28