Epson DS-520 User's Guide download pdf (Page 61)

Light status Condition/solution

The Ready light is on The scanner is turned on and ready to scan.

The Ready light is flashing The scanner is scanning or initializing. Wait for the Ready light to stop

flashing before turning off the scanner.

The ! error light is on An error has occurred. Try the following:

• Check the scanner connection to your computer to make sure it is

secure.

• Make sure the scanner cover is closed and there is no jammed paper

inside.

• If the ! error light is still on, turn off the scanner, then turn it on again.

If the error continues, the scanner may be malfunctioning. Contact

Epson for support.

The ! error light and the The scanner firmware is updating. Do not turn off the scanner or

Ready light are flashing disconnect any cables until the status lights have stopped flashing.

alternately

The ! error light and the A scanner error has occurred. Turn the scanner off and then back on

Ready light are flashing at the again. If the error continues, contact Epson for support.

same time

Parent topic: Solving Problems

Related references

Original Jams in Scanner

Where to Get Help

Solving Scanning Problems

Check these solutions if you have problems scanning with your product.

Scanner Does Not Turn On or Turns Off Unexpectedly

Scanner Button Does Not Work as Expected

Scanning Software Does Not Operate Correctly

Cannot Start Epson Scan

Original Feeds Incorrectly in Scanner

Original Jams in Scanner

Scanning is Slow

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 84 85

No comments

Epson DS-520 User's Guide Page 61