Epson FX-890N Troubleshooting Guide download pdf (Page 3)

EPSON FX-890/FX-2190

2 - EPSON FX-890/FX-2190 6/03

Roll paper holder (8310)

Allows you to use your printer with 8.5-inch roll paper.

Front sheet guide (C814001 for FX-890,

C814011 for FX-2190)

Allows you to load single sheets and carbonless single-sheet

multi-part forms of up to 6 parts.

Front paper guide (C814021 for FX-890,

C814031 for FX-2190)

Allows you to load single sheets and carbonless single-sheet

multi-part forms of up to 6 parts without removing the

tractor from the front push position.

Optional Interface Cards

You can install an optional interface card to supplement your

printer’s built-in USB and parallel interfaces and provide added

network compatibility. The EPSON interface cards in the table

below are compatible with your printer.

Note: Other network interface cards (such as the C823622A,

C823632A, and C823642A) are also supported on this printer. Check

with EPSON for more information.

Printer Specifications

Mechanical

Card type Model number

Serial interface C823051

32 KB intelligent serial interface C823071

Coax interface C823141

Twinax interface C823151

IEEE-1284 parallel interface C823452

EpsonNet 10/100 Base TX Internal Print Server C12C823912

Printing method 9-pin impact dot matrix

Printing speed Ultra speed draft

566 cps at 10 cpi

680 cps at 12 cpi

High-speed draft

559 cps at 10 cpi

627 cps at 12 cpi

Draft

419 cps at 10 cpi

503 cps at 12 cpi

Near letter quality

104 cps at 10 cpi

125 cps at 12 cpi

Printing direction Bidirectional logic seeking for text and

graphics printing. Unidirectional text or

graphics printing can be selected using

software commands.

Line spacing 1/6-inch or programmable in

1/432-inch increments

Printable columns FX-890: 80 columns (at 10 cpi)

FX-2190: 136 columns (at 10 cpi)

Resolution 240 × 144 dpi (near letter quality)

Paper feed

methods

Friction (front, rear)

Push tractor (front, rear)

Pull tractor (front, bottom, rear)

Push and pull tractor (front, rear);

additional tractor is required

Cut-sheet feeders (optional)

Roll paper holder (optional)

Paper feed speed Normal mode:

1/6-inch (4.23 mm) feed, 62 msec;

Continuous: 5 inches (127 mm)/

second

Copy mode:

1/6-inch (4.23 mm) feed, 83 msec;

Continuous: 3.1 inches (78 mm)/

second;

1 2 3 4 5 6 7 8 ... 18 19

Comments to this Manuals

No comments

Epson FX-890N Troubleshooting Guide Page 3

Comments to this Manuals

Related products and manuals for Print & Scan Epson FX-890N