Epson LQ-300+ User Manual Page 1

EPSON LQ-300/switchCharacter fonts:n----7 paper supports amsuifo 0Couriers 0Printer SpecificationsPrint

EPSON LQ-3002.Release the sprocket units by pulling the sprocket locksforward.3.Slide the left sprocket unit using the scale on the printer asa guide.

EPSON LQ-300Switching back to single sheetsTo switch to single sheets, press the Font and LF/FF buttons’at the same time; the printer feeds the paper

EPSON LQ-3007.Make sure your paper has a clean, straight leading edge.Open the sprocket covers. Fit the first holes of the paperover the sprocket pins

EPSON LQ-3005.Turn the ribbon-tightening knob in the direction of thearrow to remove any slack in the ribbon.6.Insert the ribbon cartridge into the p

EPSON LQ-300Note:Use recycled paper under normal conditions only. If ribbonconsumption or paper jamming increase, use a higher grade ofpaperLabels:si

EPSON LQ-300EnvironmentalTemperature:Operation:5 to 35OC (41 to 95°F)Operation (film ribbon):15 to 35OC (59 to 95OF)Operation (envelopes, labels, or r

EPSON LQ-300Lights and buttonsPause LightThe orange Pause light is on when the printer stopsprinting. Each time you turn on the printer, the lightflas

EPSON LQ-300l Incerteinareas,Ulefdlowing~ertaM~,are~e:Pc437, Pc050, Pc864, Pu37GLeek, Pc8s2,Pctl53, Pcass, Pc857,PO866, PC869, IS0 Latin IT, IS0 88597

EPSON LQ-300Changing the printer settingsIf you cannot use your software program to change theprinter’s settings, you can use the Printer Setting mode

EPSON LQ-300Installing the Ribbon CartridgeBefore installing the ribbon cartridge, make sure the printeris turned off.1.Open the printer cover to the

EPSON LQ-3001. Make sure the printer is turned off and the paper-releaselever is pushed back to the single-sheet position. Raise the4. Slide a sheet o

EPSON LQ-3004.From the list of printers box, select LQ-300. If it is notavailable, choose the first available printer from thefollowing list. If you p