Epson LX-300+II Specifications download pdf (Page 5)

Epson LX-300+II

7/06 Epson LX-300+II - 5

Roll paper

A The minimum top margin is 0.17 inch (4.2 mm).

B The minimum left and right margins are 0.12 inch (3 mm).

The maximum printable width is 8 inches (203.2 mm).

Control Panel Buttons and Lights

1 Tear Off (Font) lights

Flash when continuous paper is in the tear-off position;

otherwise, the lights indicate the selected font.

2 Tear Off (Font) button

❏ Advances continuous paper to the tear-off position.

❏ Feeds continuous paper backward from the tear-off position

to the top-of-form position.

❏ In Micro Adjust mode, selects one of the six built-in fonts.

3 LF/FF button

❏ Feeds paper line by line when pressed and released.

❏ Ejects a single sheet or advances continuous paper to the

next top-of-form position when held down.

❏ In Micro Adjust mode, adjusts the top-of-form and tear-off

position.

4 Load/Eject button

❏ Loads a single sheet of paper.

❏ Ejects a single sheet of paper.

❏ Loads continuous paper from the standby position.

❏ Feeds continuous paper backward to the standby position.

❏ In Micro Adjust mode, adjusts the top-of-form and tear-off

positions.

5 Pause button

Stops printing temporarily, and resumes printing when pressed

again. When held down for three seconds, turns on Micro

Adjust mode. To turn it off, press it again.

6 Paper Out light

❏ On when no paper is loaded in the selected paper source or

when paper is not loaded correctly.

❏ Flashes when paper has not been fully ejected or if paper is

jammed in the printer.

7 Pause light

❏ On when the printer is paused.

❏ Flashes when the printer is in Micro Adjust mode.

❏ Flashes when the print head has overheated.

Selecting a Built-in Font

It is best to use your application program to select the font you

want to use in a document. However, you may sometimes need

to select one of the printer’s six built-in fonts using the buttons

on the control panel, as described below. (The settings you

make in application programs usually override settings you

make from the printer’s control panel.)

Printable

area

❏ Draft ❏ Draft Condensed

❏ Roman ❏ Roman Condensed

❏ Sans Serif ❏ Sans Serif Condensed

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comments to this Manuals

No comments

Epson LX-300+II Specifications Page 5

Comments to this Manuals

Related products and manuals for Print & Scan Epson LX-300+II