Epson PRO4000 Specifications download pdf (Page 10)

Epson Stylus Pro 4000

10 - Epson Stylus Pro 4000 4/04

11. When done, press the

Pause button to exit the head

alignment mode.

If you want to verify or fine-tune the automatic alignment

process, you can perform a manual head alignment. See your

electronic Reference Guide for instructions.

Replacing the Cutter Blade

If you notice that your paper isn’t cut cleanly, the cutter blade

may need to be replaced. For a list of media that do not work

with the cutter, see the Printer Guide.

Make sure that the printer is on and the front cover is closed.

1. Press the Menu

2. Press

until you see MAINTENANCE, then press

again. You see CUTTER REPL.

3. Press Menu

to display EXEC.

4. Press Menu again. The print head moves to the

replacement position. OPEN TOP COVER is displayed.

5. Open the top cover.

7. When REPLACE CUTTER is displayed on the LCD, hold

down the side pin as shown and turn the latch to the right.

8. Release the side pin and carefully remove the cutter blade.

WARNING: The blade is sharp. Be careful when removing it.

9. Insert the new cutter as shown.

1 2 ... 5 6 7 8 9 10 11 12

No comments

Epson PRO4000 Specifications Page 10