Epson Stylus Color 200 Specifications download pdf (Page 7)

EPSON Stylus COLOR 200

Ink Jet Printers 6/96 EPSON Stylus COLOR 200-7

Default Setting Mode

Additional printer functions are available through the Default

setting mode. Because the printer’s factory default settings are

designed to meet the needs of almost all users, you rarely need

to change the additional printer functions listed below. If

necessary, however, you can turn on the Default setting mode

and change the settings using the control panel buttons.

Character table.

Selects the set of characters and symbols

that can be printed. The default is the U.S.A. character table.

If you commonly use a language containing accents,

symbols, or other characters not available in the U.S.A.

character table, change to a different character table.

Print direction.

Specifies how the print head moves across

the page. The options are Uni-D, Bi-D, and Auto (default).

When Uni-D is on, the print head prints in only one direction

to provide the most precise alignment for graphics and text.

In Bi-D printing, the print head prints in both directions.

Bi-D is faster, but the vertical alignment may not be as precise

as Uni-D. When Auto is selected, the printer switches

automatically between Uni-D and Bi-D as necessary when it

receives data.

Network interface mode.

If you’re having trouble printing

when the printer is connected to multiple computers, turn on

network interface mode. By default, network interface mode

is off.

Auto line feed.

Specifies that a carriage return character

encountered in the print file be accompanied by a line feed

command. By default, auto line feed is off. If text lines print

on top of one another, turn on auto line feed.

Loading position.

Determines the top margin by defining

how close to the paper edge the first line can print. The

loading position can be 3 mm or 8.5 mm (default). Normally

you should use your software to adjust your top margin.

Font and Pitch.

Selects the built-in printer font and character

pitch used as the default setting. The factory default pitch is

10 cpi; the default font is Courier. Generally you use your

software to select the font and pitch.

Thick paper.

Select Envelope (default) if you print on thick

paper or envelopes.

Monochrome Print Speed.

Sets a faster print speed when the

monochrome print head unit is installed. The speed can be

167 cps (characters per second) or 125 cps (default).

Economy.

Turns on economy mode for printing rough drafts.

With economy mode on, the printer uses less ink by printing

fewer dots per character. (The default setting is off.)

To turn on the Default setting mode and print instructions, turn

off the printer. Then hold down both the

Load/Eject

and

Cleaning

buttons while you turn the printer back on, and keep

holding down the buttons until an instruction page prints.

Follow the instructions on the page to select a language; then

press

Load/Eject

to print a second instruction page.

Follow the instruction the printer prints to change the default

settings by pressing buttons on the control panel. To exit Default

setting mode, wait until printing stops, and turn off the printer.

Charging the Ink Delivery System

The printer comes with a color print head, installed in the

printer, and a monochrome print head packed in the plastic

storage box. When you want to print in color, install the color

print head unit with the color ink cartridge in the printer. When

you want to print in black, install the monochrome print head

unit and black ink cartridge in the printer.

Note:

When printing a page that does not include color, using the black ink

cartridge is faster and more economical. However, the color ink

cartridge can print composite black. Composite black is a mixture of

the inks in the color ink cartridge and closely resembles black ink.

When you first set up the printer, you need to charge its ink

delivery system by installing first the color ink cartridge and

then replacing it with the black print head unit and cartridge.

Follow the steps in this section.

Note:

Even if you don't plan to use the black ink cartridge immediately, you

still need to install it to charge the ink delivery system.

Once both ink delivery systems are charged, you can easily

switch between color and monochrome printing as needed.

Load/

Eject

and

Cleaning

(Default

setting

mode)

Enters the printer’s Default setting mode and

prints an instruction page. (Paper must be

loaded in the printer.) Hold down both the

Load/Eject

and

Cleaning

buttons while you

turn on the printer; continue holding down the

buttons until the printer feeds a page. To use

Default setting mode without printing an

instruction page, hold down

Load/Eject

and

Cleaning

, and turn on the printer; then press

Load/Eject

again. To exit the Default setting

mode, wait until all pages print and turn off the

printer.

Cleaning

then

Load/

Eject

(Hex dump

mode)

Prints a page containing a hexadecimal

representation (hex dump) of the data received

by the printer for troubleshooting purposes.

(Paper must be loaded in the printer.) Hold

down

Cleaning

as you turn on the printer; then

press

Load/Eject

while the

Ink Out

and

Paper

Out

lights are flashing. Send a print job. To exit

hex dump mode, wait until all pages print and

turn off the printer.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comments to this Manuals

No comments

Epson Stylus Color 200 Specifications Page 7

Comments to this Manuals

Related products and manuals for Print & Scan Epson Stylus Color 200