Epson Stylus Color 3000 Ink Jet Printer Bulletin Page 1

EPSON PRODUCT SUPPORT BULLETIN Date: 11/8/04 Originator:RB, CH, JD, SA PSB #: PSB.2004.03.001C Authorization: Reference: PSB.2004.03.001A Total Page

13. Click on General, then click the square on Reverse Order. 4. Click on Print. 10

NOTE 1: When enabled, the first page will be printed first, instead of the last page first. Or Change the orientation to “Reverse”, then you don’t h

Adobe Illustrator 8.x/9.x: In this example, we are creating a banner, which is 227 inches (Illustrators max. page setup). 1. Launch Illustrator and

5. Click on the Paper Tab. The following appears. 6. Set the Paper Source to Roll Paper (Banner) and also enable Save Roll Paper. 7. When c

8. After setting the custom page size and other driver settings (media type, resolution, etc.), click OK. This will bring you back to the docu

CorelDRAW: In this example, a banner is created at 227 inches. 1. Launch CorelDRAW and open or place an image in your page layout. 2. Adjust the

4. Click on the Paper Tab. The following appears. 5. Set the Paper Source to Roll Paper (Banner) and also enable Save Roll Paper. 16

6. When creating the custom page size, divide the banner size by a value that will make it less than the printer maximum custom page size. In this

8. At this point, click File then Print. CorelDRAW will then run a pre-flight check and will show the following window. 18

9. Click on the Layout Tab and enable Print Tiled Pages and set any additional parameters as you see fit. 10. At this point you could check o

2Maximum custom page size allowable for EPSON PostScript options (PPD): Stylus Color 3000 Stylus Pro 4000 Stylus Pro 5000 Stylus Pro 5500 Stylus Pr

1EPSON Product Support Bulletin Date: 05/06/03 Originator: ER PSB #: PSB.2003.05.002 Authorization: Reference: N/A Total Pages: 3 Product(s): EPSO

24. Click on the Add button. Then select AppleTalk from the top sub-menu and your AppleTalk zone if applicable. 5. The Print Center s

37. Once you have completed adding the Stylus COLOR 3000 PPD, The Printer List should now show the StylusRIP EPSON StylusCOLOR3000 v3010.106 queue.

1 EPSON Product Support Bulletin Date: 09/25/2002 Originator: MS PSB #: PSB.2002.09.004 Authorization: Reference: N/A Total Pages: Product(s): EP

2 2. Click on the Add button. Then select AppleTalk from the top sub-menu and your AppleTalk zone if applicable. 3. The Print Center should scan th

3 IP Printing Installation: 1. Open the Print Center, which can be found on your HDD under Applications - Utilities 2. Click on the Add button

4 4. Navigate to the location of your PPD file. After selecting the PPD file it should reflect the name of the printer under the Printer Model secti

1 EPSON PRODUCT SUPPORT BULLETIN Date: 8/8/02 Originator: RR PSB #: PSB.2002.01.001A Authorization: Reference: PSB.2002.01.001 Total Pages

2 Maximum custom page size allowable for EPSON PostScript options (PPD): Stylus Color 3000 Stylus Pro 5000 Stylus Pro 5500 Stylus Pro 7000 Stylus P

3 NOTE 1: a. Under Win 9x/Me, the PPD limit is 129 inches. b. Under Windows NT, 2000 and XP, the PPD limit is 1771.6 inches (SP7000/9000 Series) a

* These applications allow for tiling of print pages, therefore allowing you to print beyond the printers maximum page length limit and print to the a

4 Adobe Illustrator 8.01: In this example, we are creating a banner, which is 227 inches (Illustrators max. page setup). 1. Launch Illustrator and

5 5. Click on the Paper Tab. The following appears. 6. Set the Paper Source to Roll Paper (Banner) and also enable Save Roll Paper.

6 7. When creating the custom page size, divide the banner size by a value that will make it less than the printer maximum custom page size (not nec

7 8. After setting the custom page size and other driver settings (media type, resolution, etc.), click OK. This will bring you back to the document

8 CorelDRAW 9: In this example, a banner is created at 227 inches. 1. Launch CorelDRAW and open or place an image in your page layout. 2. Adjust t

9 4. Click on the Paper Tab. The following appears. 5. Set the Paper Source to Roll Paper (Banner) and also enable Save Roll Paper.

10 6. When creating the custom page size, divide the banner size by a value that will make it less than the printer maximum custom page size (not ne

11 8. At this point, click File then Print. CorelDRAW will then run a pre-flight check and will show the following window.

12 9. Click on the Layout Tab and enable Print Tiled Pages and set any additional parameters as you see fit. 10. At this point you could check

1 EPSON PRODUCT SUPPORT BULLETIN Date: 08/06/2001 PSB No.: 2001.08.001 Reference: Originator: RR Authorization: Affected Product(s): Stylus Pro 5

For Windows Users, if you encounter partial/incomeplete prints while having Finest Detail enabled, please disable this setting. It is recommended fo

2 5. You will be prompted to restart Windows, select yes and Restart. 6. Once back at the Windows Desktop, double-click the Adobe PS Installer

3 9. Select the PPD for your Printer (Note PPD Names) and click OK to continue with the driver installation. 10. (Stylus Pro 5000 only): If you

4 13. Launch the Stylus RIP application. If you have an SC3000 that was licensed with an earlier version of Stylus RIP the Stylus RIP Server should

1 EPSON PRODUCT SUPPORT BULLETIN Date: 7/26/2001 PSB No.: PSB.2001.08.003 Reference: TE01-045 Rev. A Originator: JD, RR, TC & MS Authori

1EPSON PRODUCT SUPPORT BULLETIN Date: 6/26/01 PSB No.: PSB 2001.06.004 Reference: N/A Originator: TC/RR Authorization: Affected Produc

1EPSON PRODUCT SUPPORT BULLETIN Date: April 12, 2001 IPSB No.: PSB.2001.04.001 Reference: N/A Originator: Mynor Saravia Authorization: Affected P

26. Raise the printer’s top cover to expose the carriage bar area as shown in the figure 2. Crumple up newspaper pages into several balls and caref

3Transit Instructions for a Non-Functional Stylus Color 3000 If your Stylus Color 3000 printer does not come to READY or fails to power on you wo

45. Continue with this process until no more newspaper balls can be inserted inside the exposed carriage bar area as shown in figure 6. This is to

Adobe Illustrator CS: In this example, we are creating a banner, which is 227 inches (Illustrators max. page setup). NOTE: Mac O/S 10.3.3 system i

3. Click on File, Print, click Setup, under Tiling click on the drop down arrow, select Tile Full 4. Pages and click the Printer button. 5.

7. Then click on Print. This will bring you back to the Print window. 8. This time click on Page Setup, you see the following screen, just click

9. When Page Setup is open, click on the down arrow for Custom Paper Size. NOTE: When creating the custom page size, divide the banner size by a va

11. Under Paper Size, click on the drop down arrow and select the custom paper size you created (i.e. 20 X 180) orientation is set to portrait mod