Epson Stylus Color 660 Specifications download pdf (Page 4)

EPSON Stylus COLOR 660

4 -

EPSON Stylus COLOR 660

8/99

Safety Approvals

Safety standards UL 1950 with D3, CSA C22.2 No. 950

with D3

EMC FCC part 15 subpart B class B, CSA

C108.8 class B

Parallel Interface

Forward channel

Data format 8-bit parallel, IEEE-1284 compatibility

mode

Synchronization STROBE

pulse

Handshake BUSY and ACKNLG

signals

timing

Signal level TTL compatible

Connector 57-30360 Amphenol connector or

equivalent

Reverse channel

Transmission IEEE-1284 Nibble mode

mode

Adaptable 57-30360 Amphenol

connector connector or equivalent

Synchronization Refer to the IEEE-1284 specification

Handshaking Refer to the IEEE-1284 specification

Signal level IEEE-1284 Level 1 device

Data transmission Refer to the IEEE-1284

timing specification

Control Panel

The four lights on your printer’s control panel show the

printer’s status and alert you to problems like paper jams.

power light

black ink

out light

paper out light

color ink

out light

load/eject

button

cleaning

button

power

button

The power light is on when the printer is on and

ready to print. The power light flashes when the

printer is receiving a print job, charging ink, or

cleaning the print head.

When an ink out light flashes, your ink supply is

low. Make sure you have a replacement cartridge.

When an ink out light comes on, you need to

replace the ink cartridge. See “Replacing an Ink

Cartridge” on page 6 for instructions.

When the paper out light comes on, your paper ran

out or is incorrectly loaded. Make sure none of the

sheets are curled, creased, old, stuck together, or

too thin. Reload the paper against the right edge

guide and slide the left edge guide over to the

paper’s left edge. Then press the

load/eject

button to resume printing.

When the paper out light flashes, you have a paper

jam. Turn off the printer and gently pull out all

paper. Make sure none of the sheets are curled,

creased, old, stuck together, or too thin. Reload

the paper against the right edge guide and slide the

left edge guide over to the paper’s left edge. Then

turn the printer on.

P S

B A

When the

power and

paper out buttons flash

and the

black and

color ink out lights come

on, jammed paper may be blocking movement of

the print head. Turn off the printer (press the

power button); wait 15 seconds; then turn it on

again. If this does not clear the error, contact your

dealer or EPSON as described in the Printer Basics

book.

When all the lights flash, your printer may have an

internal error. Make sure you removed all the

packing materials as described on the unpacking

sheet in the printer box. Turn off the printer (press

the

power button); wait 15 seconds; then turn it

on again. If this does not clear the error, contact

your dealer or EPSON as described in the Printer

Basics book.

When all the lights are off, the printer is not

receiving power. Try these solutions:

❏ Make sure the printer is turned on.

❏ Turn off the printer, plug in the power cord

securely, and turn on the printer.

❏ Make sure the outlet is operable and is not

controlled by a switch or timer.

❏ Try using another outlet.

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Epson Stylus Color 660 Specifications Page 4

Comments to this Manuals

Related products and manuals for Print & Scan Epson Stylus Color 660