Epson Stylus Color 660 User Manual download pdf (Page 55)

You see vertical banding . . .

■ Make sure the print head nozzles are

not clogged. To clean the print

head, see page 27.

■ Run the Print Head Alignment

utility. See page 37 for instructions.

■ Make sure the paper thickness lever

is in the 0 position, as shown below.

Set the thickness lever to the

+ position when you print on

thicker paper or envelopes. You may

also need to turn off High Speed

printing in the printer software’s

Advanced dialog box.

Your printout is blurry or

smeared . . .

■ Make sure your paper isn’t damp or

loaded face down (the printable side

should be loaded face up). If it’s

damp, reload a new stack of paper.

■ Use a support sheet with special

media or try loading your media

one sheet at a time.

■ Make sure your paper or media

meets the specifications listed in

your electronic EPSON Stylus

COLOR 660 Reference Guide.

■ Run the Print Head Alignment

utility. See page 37 for instructions.

■ Check the paper thickness lever

position. If it’s in the + position,

your printer is set for thicker paper

or envelopes and your image may

smear. For most papers, set the

paper thickness lever to the 0

position, as shown to the left.

basics.book Page 48 Thursday, September 23, 1999 10:42 AM

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 66 67

No comments

Epson Stylus Color 660 User Manual Page 55