Epson Stylus NX200 User's Guide download pdf (Page 18)

18 Printing From a Memory Card or Digital Camera

Printing From a Digital Camera

If you have a digital camera that supports PictBridge

™

or USB DIRECT-PRINT

printing, you can connect it to the NX200 Series and print your photos directly

from the camera. Check your camera manual to see if it is compatible. Your

photos must be JPEG format and sized from 80 × 80 pixels to 9200 × 9200 pixels.

Note:

Epson cannot guarantee the compatibility of any cameras. Some combinations of paper

type, size, and layout may not be supported, depending on your camera and the NX200

Series settings.

1. Before you connect your camera, make sure your NX200 Series is turned on,

but not printing.

2. Remove any memory cards from the slots.

3. Connect the USB cable that came with your

camera to the USB connector on the front of

your NX200 Series.

4. Load the paper on which you want to print your

photos (see page 4).

5. Press the paper size button to select the size and

type of paper you loaded.

If you select

Letter Size Plain Paper, the

photos print with a white border.

If you select

4"x6" Photo Paper, the photos

print all the way to the edges (borderless).

6. Turn on your camera.

7. Follow the instructions that came with your camera to select your photos and

settings, and print them.

When you finish printing, turn off your camera and disconnect it from the USB

connector on the NX200 Series.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

No comments

Epson Stylus NX200 User's Guide Page 18