Epson XP-300 User's Guide download pdf (Page 19)

Replacing Ink Cartridges 19

Replacing Ink Cartridges

Make sure you have a new ink cartridge before you begin. You must install new cartridges

immediately after removing the old ones.

Caution: Do not open ink cartridge packages until you are ready to install the ink.

Cartridges are vacuum packed to maintain reliability.

Note: Leave the expended cartridge installed until you have obtained a replacement, or

the ink remaining in the print head nozzles may dry out.

1. Turn on your printer.

2. If an ink cartridge is expended, you see a message on the LCD

screen. Note which cartridges need to be replaced and press

OK.

If a cartridge is low, you can continue printing until a cartridge

needs replacement.

If you’re replacing a cartridge before you see a message on the

LCD screen, press

if necessary and select F Setup. Select

Maintenance, then select Ink Cartridge Replacement and

press

OK.

3. Lift up the scanner unit.

4. Squeeze the tab on the cartridge and lift it up. Dispose of it

carefully. Do not take the used cartridge apart or try to refill it.

Warning: If ink gets on your skin, wash it off with soap and

water. If ink gets in your eyes, flush them immediately with

water. If it gets in your mouth, spit it out and see a doctor

right away.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

No comments

Epson XP-300 User's Guide Page 19