Epson 10600 User Manual Page 1

EPSON Stylus® Pro 10600 SeriesPRINTER GUIDE®

3Introduction | 3Where To Get HelpEPSON provides technical support and information on the installation, configuration, and operation of professional p

3-3Printing with EPSON Drivers for Macintosh | 3-33. Select the type of paper you loaded (Roll Paper or Sheet) from the Paper Source list.If your imag

3-43-4 | Printing with EPSON Drivers for MacintoshChoosing Basic Print OptionsOnce you have selected your page setup options, you need to select print

3-5Printing with EPSON Drivers for Macintosh | 3-55. Set the Mode option as follows:•Click Automatic to have the printer driver analyze the contents o

3-63-6 | Printing with EPSON Drivers for Macintosh7. Choose from the following buttons to access additional features:•Click to access the printer mo

3-7Printing with EPSON Drivers for Macintosh | 3-73. If necessary, you can change your Media Type and Ink settings.4. Choose one of the following Prin

3-83-8 | Printing with EPSON Drivers for Macintosh6. Choose one of the following Color Management settings:• Color Controls Lets you specify individua

3-9Printing with EPSON Drivers for Macintosh | 3-9Color Management SettingsThe following tables list the color management settings available when you

3-103-10 | Printing with EPSON Drivers for MacintoshPaper Configuration OptionsTo access the paper configuration settings, click the Paper Config butt

3-11Printing with EPSON Drivers for Macintosh | 3-11Managing Print JobsYour printer comes with several utilities that let you check on your print jobs

3-123-12 | Printing with EPSON Drivers for Macintosh5. Click OK to save your settings and return to the printer settings dialog box. 6. Click Print to

44 | IntroductionMacintosh System RequirementsTo use your printer in either a standalone or peer-to-peer network environment, your system should inclu

3-13Printing with EPSON Drivers for Macintosh | 3-13You can also do the following:•Double-click a file in the list to preview it•Double-click Copies t

3-143-14 | Printing with EPSON Drivers for MacintoshCancelling PrintingIf you need to cancel a print job, follow these steps:1. Press the Power button

3-15Printing with EPSON Drivers for Macintosh | 3-152. Click the EPSON StatusMonitor icon. The software checks the amount of ink remaining in the prin

3-163-16 | Printing with EPSON Drivers for MacintoshYou see the Configuration Settings dialog box:3. Select from the following configuration options:•

1Your Stylus Pro 10600 comes with drivers and utilities that let you print and manage print jobs without a RIP. ICC profiles are included, so you can

4-24-2 | Printing with EPSON Drivers for WindowsChoosing Basic Print OptionsBefore you print, you need to set basic printing properties. The EPSON dri

4-3Printing with EPSON Drivers for Windows | 4-34. For the ink type, select the correct setting for the type of image you’re printing: •For color phot

4-44-4 | Printing with EPSON Drivers for Windows7. When you’re finished choosing print options, click the Paper tab and follow the instructions on pag

4-5Printing with EPSON Drivers for Windows | 4-5Choosing Paper and Layout OptionsMany paper options correspond to paper handling features that you can

4-64-6 | Printing with EPSON Drivers for Windows4. When you’re using roll paper, set the following options:• Auto RotateSaves paper if your document l

5Introduction | 5Windows System RequirementsTo use your printer in either a standalone or peer-to-peer network environment, your system should include

4-7Printing with EPSON Drivers for Windows | 4-7Choosing Advanced Print OptionsFor complete control over your printing environment, use these Advanced

4-84-8 | Printing with EPSON Drivers for Windows5. Choose any of the following: • Super MicroWeave or MicroWeaveEliminate unwanted banding effects. Th

4-9Printing with EPSON Drivers for Windows | 4-97. Click Save Settings if you want to have your advanced settings available for reuse. Then type a nam

4-104-10 | Printing with EPSON Drivers for WindowsPaper Configuration SettingsTo access the paper configuration settings, click the Paper Config butto

4-11Printing with EPSON Drivers for Windows | 4-11Managing Print JobsYour printer comes with several utilities that let you check on your print jobs a

4-124-12 | Printing with EPSON Drivers for WindowsUsing the Spool ManagerThe Spool Manager (not available with Windows NT) displays the status of your

4-13Printing with EPSON Drivers for Windows | 4-131. To open Status Monitor 3 from an application, access the Properties dialog box, as described on p

4-144-14 | Printing with EPSON Drivers for Windows3. Click the EPSON Status Monitor 3 button. The following window appears. (It also opens automatical

4-15Printing with EPSON Drivers for Windows | 4-152. Click the Utility tab, then click the Speed & Progress button. You see the Speed & Progre

4-164-16 | Printing with EPSON Drivers for Windows5. If you want to have the Status Monitor 3 icon appear in your Windows taskbar, click the Shortcut

66 | IntroductionENERGY STAR ComplianceAs an ENERGY STAR Partner, EPSON has determined that this product meets the ENERGY STAR guidelines for energy e

1The EPSON Stylus Pro 10600 printer requires very little maintenance to keep working its best. This chapter describes the following routine procedures

5-25-2 | Maintaining and Transporting the PrinterChecking Printer Status and Part LifeUsing the control panel, you can check the amount of ink remaini

5-3Maintaining and Transporting the Printer | 5-3Checking Ink Levels and Component LifeTo view printer status information on the control panel instead

5-45-4 | Maintaining and Transporting the PrinterRunning a Cleaning CycleIf your printed image is unexpectedly light or faint or dots are missing from

5-5Maintaining and Transporting the Printer | 5-54. Press the Enter button. The nozzle check prints as shown below. If all the lines in the check patt

5-65-6 | Maintaining and Transporting the PrinterIf the lines on the pattern still appear broken after several cleaning cycles, or if any dots are out

5-7Maintaining and Transporting the Printer | 5-7Aligning the Print HeadIf banding appears on your prints, or vertical lines are not straight, you nee

5-85-8 | Maintaining and Transporting the Printer8. Examine the first row (marked #1 C). You see a series of patterns similar to the one below across

5-9Maintaining and Transporting the Printer | 5-914. When done performing the adjustment in Uni-D (uni-directional) mode, as described above, you shou

5-105-10 | Maintaining and Transporting the PrinterReplacing Ink CartridgesBefore you begin a large print job, you should check your ink levels as des

7Introduction | 7•Place the printer near a wall outlet where the plugs can be easily unplugged.Placez l’imprimante près d’une prise de contacte où la

5-11Maintaining and Transporting the Printer | 5-11Ordering and Replacing CartridgesWhen you installed the printer’s first ink cartridges, you initial

5-125-12 | Maintaining and Transporting the PrinterBefore you start, make sure the printer is on. Then follow these steps to replace an ink cartridge:

5-13Maintaining and Transporting the Printer | 5-134. Carefully pull the empty cartridge straight out of the printer.5. Make sure the replacement cart

5-145-14 | Maintaining and Transporting the Printer6. Hold the ink cartridge with the arrow mark on the left side and pointing toward the printer. The

5-15Maintaining and Transporting the Printer | 5-15Switching Between Black Ink ModesIf your printer uses EPSON UltraChrome ink, you can switch between

5-165-16 | Maintaining and Transporting the PrinterSince this process consumes some ink from the color cartridges as well as the black one, you need t

5-17Maintaining and Transporting the Printer | 5-17Replacing the Black Ink CartridgeMake sure you have all the needed supplies as described above. Onc

5-185-18 | Maintaining and Transporting the Printer7. When you see the message INSERT BK INK on the control panel, insert the new (replacement) black

5-19Maintaining and Transporting the Printer | 5-19Windows Users1. Click the Main tab in your printer software and make sure the correct ink cartridge

5-205-20 | Maintaining and Transporting the PrinterReplacing the Paper Cutter BladeIf you notice that your paper isn’t cut cleanly, the cutter blade m

88 | Introduction•Do not dismantle the ink cartridges or try to refill them. This could result in damage to the print head.•Install the ink cartridge

5-21Maintaining and Transporting the Printer | 5-213. Press the Enter button. The print head moves to the cutter replacement position.4. When OPEN LOW

5-225-22 | Maintaining and Transporting the Printer6. Slowly take your finger off the side pin, then remove the cutter blade. Be careful not to lose t

5-23Maintaining and Transporting the Printer | 5-23Cleaning the PrinterTo keep your printer working its best, you should clean it thoroughly several t

5-245-24 | Maintaining and Transporting the PrinterTransporting or Storing the PrinterIf you are moving the printer a short distance (for example, in

5-25Maintaining and Transporting the Printer | 5-255. If you’re removing the printer from its stand, first make sure the casters on the leg assembly a

5-265-26 | Maintaining and Transporting the PrinterSetting Up the Printer After TransportationSetting up the printer after transporting it is almost i

5-27Maintaining and Transporting the Printer | 5-275. Release the front casters and retract the stabilizer knobs.6. Carefully roll the printer to its

5-285-28 | Maintaining and Transporting the Printer

1As you use your printer, you may occasionally experience a problem. The first thing you should do is diagnose the problem following the guidelines in

6-26-2 | Resolving ProblemsUsing the Control Panel to Check the PrinterThe control panel includes various lights and a display to indicate the status

1-1Setting Up the Printer | 1-1Follow the steps in this chapter to assemble the printer, install the software, and make any necessary adjustments. You

6-3Resolving Problems | 6-3FRONT COVER OPENPause light on Lower cover is open. Close the lower cover. INK COVER OPEN Pause light on You are replacing

6-46-4 | Resolving ProblemsImproving Print QualityYou can often improve print quality by doing the following:•Run a nozzle check and cleaning cycle. S

6-5Resolving Problems | 6-5If none of these suggestions help, try the solutions on the following page.Print quality problemsProblem Solution Your prin

6-66-6 | Resolving ProblemsYour print has gaps or appears faint.• Check the expiration date printed on each of the ink cartridges. If the cartridge is

6-7Resolving Problems | 6-7Solving Operational ProblemsIf you can’t turn the printer on, if it stops printing unexpectedly, or if nothing prints, chec

6-86-8 | Resolving ProblemsSolving Miscellaneous Printing ProblemsIf your printouts are not what you expected, try the suggestions below:Nothing print

6-9Resolving Problems | 6-9Your print has incorrect margins.• Check the page size or paper size settings in your application. Make sure they are withi

6-106-10 | Resolving ProblemsSolving Paper ProblemsIf paper feed or paper jam problems occur frequently, try one or more of the following solutions:•W

6-11Resolving Problems | 6-11•For posterboard, follow the instructions on page 2-20 to load the media correctly.•Make sure the paper is not folded, wr

6-126-12 | Resolving Problems•If you have the paper basket set up in front of the printer, extend the paper guides out so they rest on the front of th

1-21-2 | Setting Up the PrinterUnpacking and AssemblyFollow these steps to unpack and assemble your printer. Unpacking the StandAfter unpacking the st

6-13Resolving Problems | 6-13Clearing Paper JamsWhen paper gets jammed in the printer, printing stops and you see a PAPER JAM message on the control p

6-146-14 | Resolving Problems4. Carefully pull down the jammed paper. TURN PWR OFF AND ON is displayed on the control panel.5. Close the lower cover,

6-15Resolving Problems | 6-156. On the installer screen, click the arrow in the Easy Install list at the top and select Uninstall. Then click the Unin

6-166-16 | Resolving Problems

1PrintingAppendix A: SpecificationsNoteAdditional specifications are provided in the Reference Guide included on the CD-ROM that came with your printe

A-2A-2 | SpecificationsEnvironmentalDimensions and Weight ElectricalCheck the label on the back of your printer for voltage information.Printer Interf

A-3Specifications | A-3Safety ApprovalsPaperPoor quality paper may reduce print quality and cause paper jams or other problems. If you encounter probl

A-4A-4 | SpecificationsInk CartridgesCartridge lifePhotographic Dye 2 years from production date; within 2 years after opening packageUltraChrome and

-1AAccessories, 2Advanced Photo setting, 3-5Aligning print head, 5-7 to 5-9AppleTalk setting, 1-28Archival Inkink cartridges, 5-11Auto Cut setting, 2-

-22 | IndexEnvironmental specifications, A-2EPSONaccessories, 2help, 3media, 2-2 to 2-6Preferred Protection Plan, 3Store, 2Error messages, 6-2Error no

1-3Setting Up the Printer | 1-3Assembling the Stand1. Insert the cross bar into one of the upright supports as shown. Then attach it with two bolts us

-3Index | 3MMacintoshadvanced print options, 3-6 to 3-10background printing, 3-11 to 3-12basic print options, 3-4 to 3-6color management, 3-8 to 3-9Co

-44 | IndexPaper cutterchecking life, 5-2 to 5-3replacing blade, 5-20 to 5-22service life, A-1Paper feed speed, A-1Paper guides, 6-11 to 6-12Paper Out

-5Index | 5Problems (cont.)nothing prints, 6-7 to 6-8operational, 6-7 to 6-8paper, 6-10 to 6-14paper feeding, 6-9, 6-11 to 6-12paper jams, 6-13 to 6-1

-66 | IndexTTechnical support, 3Temperature requirements, A-2Test Print menu, 5-2Text/Graph setting, 3-5, 4-4Transporting printer, 5-24 to 5-27Trim li

1-41-4 | Setting Up the PrinterUnpacking the PrinterAfter unpacking the printer, make sure all these items are included:3-inch roll paper spindle2-inc

iiPrinted on recycled paper.Copyright © 2002 by Epson America, Inc. All rights reserved. No part of this publication may be reproduced, stored in a re

1-5Setting Up the Printer | 1-5Mounting the Printer on the Stand1. Lock the two casters to keep the stand from rolling. Then extend the stabilizer kno

1-61-6 | Setting Up the Printer3. Locate the recessed handles, two near each corner of the printer. 4. Using four people, grasp the handles as shown,

1-7Setting Up the Printer | 1-76. Remove any packing tape from the printer. Be sure to check underneath and on the sides.7. Open the front cover and r

1-81-8 | Setting Up the PrinterAttaching the Basket1. Attach the short metal rods to the upper guides:2. Attach the long metal rods to the lower guide

1-9Setting Up the Printer | 1-94. Pass the rear part of the basket under the printer. Rotate the bar one revolution so that the fabric folds around th

1-101-10 | Setting Up the Printer7. Hold the front bar and turn it one revolution. Then attach it to the lower metal rods.8. Push the upper and lower

1-11Setting Up the Printer | 1-11Connecting the Power Cord1. Connect the power cord to the AC inlet on the back of the printer.2. Route the power cord

1-121-12 | Setting Up the PrinterInstalling the Ink CartridgesDepending on which version of the Stylus Pro 10600 you have, the ink cartridge starter k

1-13Setting Up the Printer | 1-13Before you begin, make sure the printer is plugged into a grounded outlet. Then follow these steps to install the car

1-141-14 | Setting Up the Printer3. Attach the ink label to the inside of the ink compartment cover. 4. Push down on the top of the first cartridge cl

iiiFCC Compliance StatementFor United States UsersThis equipment has been tested and found to comply with the limits for a Class A digital device, pur

1-15Setting Up the Printer | 1-156. Hold the cartridge so the arrow mark on its left side is pointing toward the printer. Insert the cartridge into th

1-161-16 | Setting Up the PrinterLoading the Roll PaperBefore you begin, locate the roll paper that was included with your printer. (It should already

1-17Setting Up the Printer | 1-173. Place the black end of the spindle into the corresponding left mounting bracket.4. Press the Paper Source button o

1-181-18 | Setting Up the Printer5. Pull the paper set lever out, to the released position. The Paper Out light on the control panel comes on and LOAD

1-19Setting Up the Printer | 1-197. If you’re using the roll paper that came with the printer, decrease the suction by pressing the Paper Feed – butto

1-201-20 | Setting Up the Printer9. Turn the roll back to remove any slack. Then align the paper with the two rows of holes at the paper exit.10. Push

1-21Setting Up the Printer | 1-21Connecting the Printer to Your ComputerDepending on your system, you can connect the printer to your computer using a

1-221-22 | Setting Up the PrinterConnecting to the USB PortTo connect the printer to a USB port, you need a standard shielded USB cable. Follow the st

1-23Setting Up the Printer | 1-23Connecting to the Parallel Port (Windows Only)To use the printer’s built-in parallel interface, you need a shielded,

1-241-24 | Setting Up the PrinterConnecting to the IEEE 1394 (FireWire) PortTo connect through the printer’s IEEE 1394 port, you need a standard shiel

vIntroductionAbout Your Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Options and Accessories . . . . . . . . .

1-25Setting Up the Printer | 1-25Connecting to the Ethernet PortTo connect the printer using its Ethernet port, you need a 10/100 Ethernet cable. Foll

1-261-26 | Setting Up the PrinterInstalling the Printer SoftwareFollow the steps below (for Macintosh) or on page 1-29 (for Windows) to install your p

1-27Setting Up the Printer | 1-27You see a dialog box similar to this one:7. Click the Install button, then click Continue on the next screen.8. Follo

1-281-28 | Setting Up the Printer12. Click the SPro 10600 icon, then click the icon for your printer port.13. Turn on Background Printing if you want

1-29Setting Up the Printer | 1-29Installing the Software for WindowsAfter connecting the printer to your computer, install the printer driver and util

1-301-30 | Setting Up the Printer7. If you’re connecting through the parallel port or Ethernet port, see the note at left. Otherwise, follow the instr

1-31Setting Up the Printer | 1-318. If you see a screen like this during installation, do not click Retry or Cancel. Click the close button.9. When

1-321-32 | Setting Up the PrinterSetting Up Your FireWire PortIf you’re connecting with FireWire (IEEE-1394) on a Windows system, you may see a Found

1-33Setting Up the Printer | 1-33Optimizing Print SpeedDepending on your system, you may be able to optimize your print speed as described in these se

1-341-34 | Setting Up the PrinterUsing the Speed & Progress UtilityIf you’re printing from Windows through a parallel port, you can optimize your

-vivi | ContentsSetting Up Your Printer on a Network . . . . . . . . . . . . . . . . . . . . . . . 1-41Setting Up on a Macintosh Network . . . . . .

1-35Setting Up the Printer | 1-353. Select from the following options:• High Speed Copies speeds up printing of multiple copies of the same document u

1-361-36 | Setting Up the PrinterRunning a Nozzle CheckBefore printing, follow the steps below to run a nozzle check from your printer driver. The noz

1-37Setting Up the Printer | 1-37You see the Utility menu:4. Click the Nozzle Check button, then click Print to print a nozzle check pattern. 5. Exami

1-381-38 | Setting Up the Printer7. If the pattern is missing dots (as shown below) or if any are out of place (deflected), click Clean and follow the

1-39Setting Up the Printer | 1-39Aligning the Print Head Before you use the printer, you should align the print head to ensure accurate, clean printou

1-401-40 | Setting Up the Printer8. Look at the other patterns across the same row to see if the same number is consistently the best line. If not, de

1-41Setting Up the Printer | 1-41Setting Up Your Printer on a NetworkIf your printer is connected over a network, follow the steps in the appropriate

1-421-42 | Setting Up the Printer2. Click the On radio button to turn Background Printing on.3. Click the Setup button. You see the following dialog b

1-43Setting Up the Printer | 1-432. If you’re prompted for a password, enter the password for the printer and click OK.3. Make sure Background Printin

1-441-44 | Setting Up the Printer4. Select the I want to be able to allow others to print to my printer(s) check box and click OK.5. In the Network wi

-viiContents | viiChecking Printer Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14Selecting Configuration Options .

1-45Setting Up the Printer | 1-453. The Add Printer Wizard screen appears. Click Next. You see a window like the following:4. Click Network printer, t

1-461-46 | Setting Up the PrinterSetting Up on a Windows XP NetworkThis section tells you how to set up your printer so that computers on the network

1-47Setting Up the Printer | 1-474. When done, you see the following screen. Select Share this printer, then type the name of the shared printer as sh

1-481-48 | Setting Up the Printer3. The Add Printer Wizard screen appears. Click Next. You see a window like the following:4. Click A network printer,

1-49Setting Up the Printer | 1-49Setting Up on a Windows NT 4.0 or Windows 2000 NetworkThis section tells you how to set up your printer so that compu

1-501-50 | Setting Up the PrinterConfiguring the Client ComputersPerform these steps on every computer that will need to access the printer:1. Click S

1-51Setting Up the Printer | 1-515. Select Local Port, then click New Port. The following dialog box appears:6. In the text box, type the appropriate

1-521-52 | Setting Up the Printer

1The EPSON Stylus Pro 10600 prints on a variety of media, including roll paper and cut sheets up to 44 inches wide. You can also use heavy stock, incl

2-22-2 | Using Paper and Other MediaSelecting Paper for Your PrinterYou can print on most types of coated, glossy, plain paper, and other media. The f

-viiiviii | ContentsTransporting or Storing the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . 5-24Preparing the Printer for Shipment .

2-3Using Paper and Other Media | 2-3Printing on EPSON Media EPSON papers, which are specially formulated for the inks used in your printer, ensure hig

2-42-4 | Using Paper and Other MediaPhoto Glossy Paper 44-inch roll: SP9100236-inch roll: SP9100124-inch roll: SP91021—✓✓✓Photo Semigloss Paper 44-inc

2-5Using Paper and Other Media | 2-5Matte Paper Heavyweight— 8.5" × 11": S04125711.7" × 16.5": S04126013" × 19": S041263

2-62-6 | Using Paper and Other Media* Requires optional 3-inch high-tension spindle** Requires optional 2-inch high-tension spindle EPSON Velvet Fine

2-7Using Paper and Other Media | 2-7Selecting the Media Type Setting When you print, it’s important to select an appropriate Media Type setting for th

2-82-8 | Using Paper and Other MediaSelect these settings if your printer uses Photographic Dye: Use these settings when printing with Archival ink:Me

2-9Using Paper and Other Media | 2-9* Select the Media - 1 setting if you want to print on this material in high ink duty mode. In addition to the Med

2-102-10 | Using Paper and Other MediaUse these settings when printing with UltraChrome ink: Media Type settings when printing with UltraChrome ink Pa

2-11Using Paper and Other Media | 2-11Using Roll PaperThe printer comes with one 2-inch and one 3-inch spindle, so you can have two types of roll pape

2-122-12 | Using Paper and Other MediaLoading Roll Paper for PrintingOnce roll paper is placed on the spindle, follow these steps to load it in the pr

1Thank you for choosing the EPSON Stylus Pro 10600—the most technologically advanced system of its kind. With its innovative ink, print head, and prin

2-13Using Paper and Other Media | 2-134. Press the Paper Source button to select either Roll Auto Cut or Roll Cutter Off. •Choose Roll Auto Cut if you

2-142-14 | Using Paper and Other Media5. Pull the paper set lever out to the released position. The Paper Out light on the control panel comes on and

2-15Using Paper and Other Media | 2-158. Pull the paper down so it extends all the way through the slot.9. Turn the roll back to remove any slack. The

2-162-16 | Using Paper and Other Media10. Push the paper set lever all the way in, then close the roll paper cover. PRESS PAUSE BUTTON appears briefly

2-17Using Paper and Other Media | 2-17Selecting Print Settings for Roll PaperBefore printing, you need to make sure you select the correct settings in

2-182-18 | Using Paper and Other MediaRemoving Unused Roll PaperOnce your printouts are removed from the printer, follow these steps to remove any unu

2-19Using Paper and Other Media | 2-194. Remove the roll paper and spindle from the printer. 5. To remove the paper from the spindle, lay it on a flat

2-202-20 | Using Paper and Other Media4. Feed the sheet into the paper slot until it meets resistance. Make sure the right edge of the paper is straig

2-21Using Paper and Other Media | 2-214. Pull the paper set lever out, to the released position. Then open the lower cover. (The cover has tabs that s

2-222-22 | Using Paper and Other Media7. Push the paper set lever all the way in, then close the lower cover. PRESS PAUSE BUTTON appears on the contro

22 | IntroductionOptions and AccessoriesYour EPSON Stylus Pro 10600 printer offers these optional upgrades and accessories: * Replaces the blade for t

2-23Using Paper and Other Media | 2-23Using the Paper BasketThe paper basket is a cloth sheet that attaches to your printer and catches your printouts

2-242-24 | Using Paper and Other Media2. Push the upper metal rods all the way in. Then fully extend the lower metal rods, so they rest on the floor.C

2-25Using Paper and Other Media | 2-25Creating Custom Print SettingsYou can use the printer’s SelecType™ menu options to control how the printer handl

2-262-26 | Using Paper and Other MediaPrinting Trim LinesIf you’re printing on roll paper, you can have the printer print trim lines on the right edge

2-27Using Paper and Other Media | 2-27Turning Off Paper MonitoringThe printer normally stops and displays an error message if you try to print an imag

2-282-28 | Using Paper and Other MediaUsing the Paper Configuration Menu When you choose a media type in your EPSON printer software, the driver autom

2-29Using Paper and Other Media | 2-294. Use the + or - button to make any necessary changes, then press Enter to save your new setting. 5. To adjust

2-302-30 | Using Paper and Other Media6. Press the + or - button to select the number noted in step 5. Then press Enter.7. Press the Item button to se

1Your EPSON Stylus Pro 10600 comes with drivers and utilities that let you print and manage print jobs in non-PostScript® mode without a RIP. ICC prof

3-23-2 | Printing with EPSON Drivers for MacintoshChoosing Page Setup OptionsMany of the page setup options correspond to paper handling features that