Epson All-In-One Stylus Photo RX600 User Manual download pdf (Page 112)

112 Printing From Other Devices

Printing From a Digital Camera

PictBridge and USB Direct Print allow you to print your photos when connecting

your camera directly to the Stylus Photo RX600.

1. Remove any memory cards from the Stylus Photo RX600. (If you leave a card

in the printer, photos will be read from the memory card in the Stylus Photo

RX600 instead of your camera.)

2. Connect the USB cable from your camera to the

EXT I/F USB port on the

front of the Stylus Photo RX600. Some digital cameras require a special USB

cable; if so, be sure to use the one that came with the camera.

3. Turn on the Stylus Photo RX600 and your camera. After a moment, the

Stylus Photo RX600 reads and counts the number of photos in your camera.

4. Press the

Setup button to set the RX600 to Setup mode.

5. Use the d button to highlight

Direct print image set and press OK.

6. Choose the Paper Type, Paper Size, Layout, Resolution, and other print

settings (see page 85 for details).

7. When you have finished selecting print settings, press

OK.

8. Use the camera controls to print your photos. See your camera documentation

for printing instructions.

Note:

If your camera is not compatible with PictBridge or USB Direct Print, you’ll see a

message saying that the connected device cannot be used. Epson cannot

guarantee the compatibility of any cameras.

EXT/IF USB

port

SP RX600 Users Guide.book Page 112 Thursday, January 29, 2004 1:08 PM

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 163 164

No comments

Epson All-In-One Stylus Photo RX600 User Manual Page 112