Epson ELPMBPRG User Manual download pdf (Page 7)

ISSUED: 04-01-08 SHEET #: 055-9254-2

7 of 12

Visit the Peerless Web Site at www.peerlessmounts.com For Technical Support Contact Peerless Mounts at 1-800-729-0307 or 708-865-8870.

Installing Plates to Projector

Adapter Plate: POWERLITE 1700c, 1705c, 1710c,

1715c, 1810p, 1815p, 1825, S5, 77c, 83+, 822+

Use adapter plate (B) as shown. Continue to step 3.

3-Plate Horizontal Configuration: POWERLITE

6100i, 6110i, 7900p

Attach adapter plate (B) to side plates (C) using six

M4 x 6 mm socket pin screws (G).

Attach adapter plate (B) to side

plates (C) using six M4 x 6 mm

socket pin screws (G)

CONNECTION BLOCK

3-Plate Vertical Configuration: POWERLITE 8300i

Loosen two #10-32 x 3/8" serrated washer head socket pin

screws (H) on adapter plate (B) and connection block as shown in

bottom detail 1. Rotate connection block to 90° as shown in fig. 2.1.

Securely retighten #10-32 x 3/8" serrated washer head socket pin

screws (H).

2-1

BOTTOM

DETAIL 1

fig. 2.1

• All spacers shall be used where indicated. Not using spacers can cause damage to projector.

• It is the responsibility of the installer to ensure that the projector is properly ventilated.

CAUTION

NOTE: For all POWERLITE models, the manufacturer's product weight must be reviewed to ensure that the weight does not

exceed 50 lbs.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Epson ELPMBPRG User Manual Page 7