How do you want to get images to the projector?
To connect computer or video equipment,
see the instructions below and on the right.
To project over an 802.11b network, see
“If projecting wirelessly” on the back of this sheet.
To give a presentation stored on a memory card,
see Chapter 5 in your User’s Guide.
For details on any of these topics, see your User’s Guide.
If connecting a computer...
1 Make sure you’ve turned on the projector and adjusted the image
as described at left.
2 Locate the VGA cable that came with the projector. Connect one end
to the projector’s Computer/Component Video port.
Connect the other end to your laptop’s video-out port. (If you’re using
a desktop model, first disconnect the monitor cable from the computer,
then plug in the projector cable.)
EPSON
®
PowerLite
®
735c
Quick Setup
3 Choose a
Presentation Method
1 Turn On the Projector
1 Connect the power cord to
the back of the projector
and plug the other end into
a grounded outlet.
2 Remove the lens cover.
3 Locate the projector’s remote control.
Before using it for the first time, pull
out the plastic tape from the battery
tray (you don’t have to open the tray).
4 Aim the remote control at the
projector and press the red Power
button. The Power light flashes
green and the projector lamp comes
on in about 40 seconds.
Menu
A/V Mute
E-Zoom
Freeze
S-Video/Video
Color Mode
Page upPage down
Power
ESCAuto
Enter
Comp/EasyMP
3 Press the Comp/EasyMP button on the remote control until your
computer image is displayed.
4 If you’re using a laptop and you see a blank screen, you may need to
adjust its display settings:
Windows
®
: Hold down the Fn button on the keyboard and press the
function key that lets you display on an external monitor. It may have
an icon such as , or it may be labeled CRT/LCD. You may have to
use the Display utility in the Control Panel to enable both the LCD
screen and the external monitor port.
Macintosh
®
OS 9 or earlier: From the Apple menu, select Control
Panels, then click Monitors or Monitors and Sound. Click the
Arrange icon, then drag one monitor icon on top of the other;
this lets you display on both the projection screen and the LCD
screen. If this option isn’t available, click the Monitor icon and
select a Simulscan resolution.
Macintosh OS X: From the Apple menu, select System Preferences,
then click Displays. Select the VGA Display or Color LCD dialog box,
click the Arrange (or Arrangement) tab, and make sure Mirror
Displays is checked.
5 If you see an image but it’s not displayed correctly, press the Auto
button on the remote control to automatically readjust it.
If connecting video equipment...
1 Make sure you’ve turned on the projector and adjusted the image
as described on the far-left.
2 Locate the RCA-style video cable that came with the projector.
Connect one end to the projector’s Video port.
3 Connect the other end to the video-output connector on your
video equipment.
4 Press the S-Video/ Video button on the remote control until your
video image is displayed.
S-Video/Video
Color Mode
Page upPage down
Power
Comp/EasyMP
S-Video/Video
Color Mode
Page upPage down
Power
Comp/EasyMP
2 Rotate the focus ring to sharpen the image.
Rotate the zoom ring to reduce or enlarge the image.
3 If your image looks like or , you’ve placed the projector off
to one side of the screen at an angle. Place it directly in front of the
center of the screen, facing the screen squarely.
4 If your image looks like or , press the or side of the
Keystone button on the projector.
Power button
Focus ring
Zoom ring
Comp/EasyMP button
S-Video/Video button
1 To raise the image, press the blue foot release buttons on each side
of the projector and lift the front. Release the buttons to lock the
feet in position.
You can fine-tune the height by rotating the feet.
2 Adjust the Image
continued
continued
Keystone
button
Click here
Drag one monitor
icon onto the other
(22 pages)
(102 pages)
(80 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals