Epson 73c User Manual download pdf (Page 82)

76 Appendix A: Connecting to Additional Equipment

Installing the Projector

The projector can be installed for three different viewing setups:

front projection, ceiling mounting, or rear projection onto a

semi-transparent screen.

To project from overhead, you’ll need to select

Ceiling in the

projector’s Advanced menu. To project from the rear, select

Rear

Proj

. See page 46 for more information.

If you’re ceiling-mounting the projector and you place it above screen

level, you’ll have to tilt it down to position the image on-screen. This

causes the image to lose its rectangular shape. You can then correct the

distortion by using the

Keystone function in the projector’s menu

system (see page 45). (You can’t use the

Auto Keystone function

when you’re projecting in ceiling or rear projection mode.)

If you place the projector’s lens so it’s level with the top of the screen,

the image will be rectangular and you won’t have to adjust it. If you

place the lens lower than the top of the screen, you’ll have to tilt the

projector upward if you want to fill the whole screen with the image.

Connecting to a PC Desktop Computer

You can connect the projector to any IBM

-compatible PC. This

section includes instructions for the following:

■ Connecting the computer cable

■ Connecting a monitor to view your display on the desktop

computer screen

■ Connecting the mouse cable (if you want to use the remote

control as a mouse)

■ Connecting an optional audio cable (if you’ll be projecting

with audio)

Follow the steps in each section for the cables you need to connect.

Before beginning, turn off the projector and computer if they are on.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 107 108

No comments

Epson 73c User Manual Page 82