Epson BrightLink 450Wi User Manual download pdf (Page 97)

Using the Projector on a Network 97

Using Wireless Security Options

The projector includes WEP and WPA data encryption security

options which you can enable for network projection.

Make sure the settings you select match the ones used by your

network; follow the directions from your network administrator.

See the following sections to enable security options on your

projector:

■ “Enabling WEP Encryption” below

■ “Enabling WPA Security” on page 99

You also need to enable security settings from EasyMP Network

Projection (see page 100).

Enabling WEP Encryption

1. Press Menu on the projector remote. Highlight Network and

then press

Enter.

2. Choose

Network Configuration and press Enter.

3. Highlight

Security, then press Enter. You see the following

screen:

4. Press

Enter to select Security, then select WEP and press Enter.

Press

Esc to return to the previous menu.

note

The authentication and

firewall features are only

effective when the access

point for the connection

destination supports the

same functions.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 185 186

No comments

Epson BrightLink 450Wi User Manual Page 97