Epson EH-TW5000 User Manual download pdf (Page 42)

Problem Solving

Indicator statuses in normal operation

During normal operation, the indicator is off. : Lit : Flashing

Lamp replacement warning

It is time to replace the lamp. Replace the lamp with a new one as soon as possible. p.52

If you continue to use the projector without replacing the lamp, the lamp may blowout.

Standby condition

If you press , projection will start after a brief interval.

Warm-up in

progress

Warm-up time is approximately 30 seconds.

Power off operations are ignored while warm-up is in progress.

Projection in

progress

Normal operation is in progress.

Cool-down

progress

(Approx. 16

seconds)

Remote control and control panel are disabled while cool-down is in

progress. Once cool-down is complete, the projector turns to stand-by

mode. If the main power switch at the rear of the projector is turned off

while cool-down is still in progress, wait until the lamp has cooled

down sufficiently (approximately 10 minutes is required), and then turn

the main power switch back on.

Orange

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 62 63

No comments

Epson EH-TW5000 User Manual Page 42