Epson PowerLite 1725 Multimedia Projector Setup Guide download pdf (Page 3)

customer-only offers. You can use the registration card or CD included

with your projector, or register online at www.epson.com/webreg.

Using EasyMP

NOTE: You must have already installed the projector’s EasyMP (EMP NS

Connection) software and configured your projector and computer. See

the EasyMP Operation Guide for instructions.

1 Select EasyMP as the source by pressing the EasyMP button on the

remote control.

2 Windows: From the Start menu,

select Programs or All Programs >

EMP NS Connection.

Mac OS X: Double-click the

EMP NS Connection icon in your

Applications folder.

3 Select Quick Connection Mode and click OK.

4 Once the name of your projector

appears, select it and click Connect.

If a projector is in use and is “locked”

to prevent interruption, you won’t be

able to select it.

5 If you see a message asking for a

keyword, enter the four digits that

appear on the EasyMP Network Screen

and click OK.

You see the image on your monitor transmitted to the projector, and a

floating control bar appears on the computer screen:

6 When you’re done with your presentation, click Disconnect on the

control bar.

Where To Get Help

For more information about using the projector, install the manuals from

your projector CD.

Telephone Support Services

To use the Epson PrivateLine

Support service, call (800) 637-7661 and

enter the PIN on the Epson PrivateLine Support card that came with your

projector. This service is available 6 AM to 6 PM, Pacific Time, Monday

through Friday, for the duration of your warranty period. You may also

speak with a projector support specialist by dialing one of these numbers:

U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday through Friday

Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through Friday

Days and hours of support are subject to change without notice. Toll or long

distance charges may apply.

Internet Support

Visit Epson’s support website at epson.com/support and select your

product for solutions to common problems. You can download utilities and

documentation, get FAQs and troubleshooting advice, or e-mail Epson with

your questions.

Visit http://www.presentersonline.com to access tips, templates, and training

for developing successful presentations.

Click here

to minimize

3 If your projector and notebook don’t display an image, do

the following:

Windows: Hold down the Fn button on the keyboard and press the

CRT/LCD or function key. If this doesn’t work, double-click

Display in the Windows Control Panel. In Windows Vista

, right-click

on the desktop and select Personalize, then select Display Settings.

Make sure both the LCD screen and monitor port are enabled. See your

Windows online help for details.

Mac OS

X: From the Apple

menu, select System Preferences,

then click Display or Displays. Click Detect Display. Select the VGA

Display or Color LCD dialog box, click the Arrangement (or Arrange)

tab, and make sure Mirror Displays is checked.

If projecting wirelessly...

Follow the steps in this section to project over an 802.11g, 802.11b, or

802.11a wireless network from a computer running Windows 2000, XP,

or Windows Vista, or Mac OS X 10.3 or later. Your computer must have a

wireless card or built-in wireless interface.

You can also project wirelessly by using the Network Projector

function in Windows Vista. See the User’s Guide for instructions.

1 Turn the projector over and unscrew the

wireless module cover.

2 Remove the wireless module cover.

3 Install the wireless LAN module.

Then replace the cover and screw.

4 Turn on the projector and adjust

the image as described in sections

1 and 2 on the front of this sheet.

5 Do one of the following:

• To use Quick Wireless Connection, follow the steps below

(Windows only).

• To use EasyMP

, see ”Using EasyMP” (Windows and Mac OS).

6 Connect the USB key (located in a

pocket inside the projector’s case) to

the projector’s Type A (flat)

USB port.

7 When you see a projected message

that the network information update

is complete, remove the USB key.

8 Connect the USB key to a USB port on your Windows computer

or notebook.

If you see the AutoPlay window in Windows Vista, select

Run Launch U3.exe. Then select Allow.

9 When you see a license agreement, click Agree to install the Quick

Wireless Connection driver. If you see a Firewall message, select Yes

to disable the Firewall. After a few moments, your computer display is

projected. If not, restart your computer.

10 When you’re done with your presentation, remove the USB key.

4114829 Rev.0

1-B C

4114829 Rev.0

1-B M

4114829 Rev.0

1-B Y

4114829 Rev.0

1-B K

Epson and EasyMP are registered trademarks and Epson Exceed Your Vision is a registered logomark of

Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.

General Notice: Other product names are for identification purposes only and may be trademarks of their respective

owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

1 2 3 4

Comments to this Manuals

No comments

Epson PowerLite 1725 Multimedia Projector Setup Guide Page 3

Comments to this Manuals

Related products and manuals for Projectors Epson PowerLite 1725 Multimedia Projector