Epson PowerLite 82c Specifications download pdf (Page 13)

Epson PowerLite 62c/82c Projector

9/05 Epson PowerLite 62c/82c Projector - 13

5. Hold the lamp as shown and pull it straight out.

Note:

The lamp(s) in this product contain mercury. Please

consult your state and local regulations regarding disposal or

recycling. Do not put in the trash.

6. Gently insert the new lamp. If it doesn’t fit easily, make sure

it’s facing the correct way.

Caution:

Do not touch the glass portion of the lamp assembly. Touching

the glass could result in premature lamp failure.

7. Once the lamp is fully inserted, tighten its screws.

Note:

Be sure to seat the lamp fully and secure the lamp cover. If the

lamp is not properly installed or the cover is loose, the lamp will

not turn on.

8. Lower the lamp cover into place. Then slide the cover closed

and tighten the screw.

9. Reset the lamp timer as described on page 13.

Resetting the Lamp Timer

You must reset the lamp timer after replacing the lamp to clear

the

Replace the Lamp warning message. Follow these steps:

Note:

Do not reset the lamp timer if you have not replaced the lamp. If

you do, the Lamp Hours will not accurately reflect the number of

hours that the lamp has been used.

1. Connect the power cable and turn on the projector.

2. Press the

Menu button on the remote control or projector

and select the

Reset menu. Then press Enter. You see the

following:

3. Select the

Reset Lamp Hours option and press Enter. You

see the following:

4. Select

Yes and press Enter.

5. Press

Esc to return to the main menu or Menu to exit the

menu system.

1 2 ... 8 9 10 11 12 13 14

No comments

Epson PowerLite 82c Specifications Page 13