Epson PowerLite 825 Multimedia Projector Setup Guide download pdf (Page 5)

Troubleshooting

If you see a blank screen...

If you see a blank screen or the No signal message after turning on your

computer, check the following:

•

Make sure the power light on the projector is green and not flashing, and

the A/V Mute slide is open.

•

Press the Source Search button on the projector or the Search button

on the remote control to select the computer as the image source.

•

If you’re using a Windows notebook, press the function key on your

keyboard that lets you display on an external monitor. It may be labelled

CRT/LCD or have an icon such as . You may have to hold down the

Fn key while pressing it.

If the projector and notebook don’t display the same

image...

Windows

Try using the CRT/LCD or key as described above. On most systems, this

key lets you toggle between the LCD screen and the projector, or display on

both at the same time.

If that doesn’t work, check your monitor settings to make sure both the LCD

screen and the external monitor port are enabled.

From the Windows Control Panel, open the Display utility. In Windows

Vista

, right-click on the desktop and select Personalize, then select

Display Settings.

Click Settings, then click Advanced. In Windows Vista, click Advanced

Settings.

The method for adjusting the setting varies; you may have to click a

Monitor tab, then make sure the external Monitor port is set as your

primary display and/or enabled.

Mac OS

From the Apple

menu, select System Preferences, then select Display

or Displays.

Click Detect Displays.

Make sure the VGA Display or Color LCD dialog box is selected.

Click Arrangement or Arrange, then make sure Mirror Displays is

selected.

Project over the network

Install EMP NS Connection on each computer that will project over the

network. Use the CD labeled Epson Projector Software for Meeting &

Monitoring to install EMP NS Connection. If you need to configure the

projector for your network, see “Network Configuration.”

Press the LAN button on the remote control.

Start EMP NS Connection on your computer.

Windows: Select Start > Programs or All Programs > EPSON

Projector > EMP NS Connection.

Mac OS® X: Double-click the EMP NS Connection icon in your

Applications folder.

Select Advanced Connection Mode and click OK.

Select the projector you want to connect to, then click Connect.

If you don’t see the projector you want, click the Automatic search

button.

If you see a message asking for a keyword, enter the four digits that

appear on the LAN standby screen and click OK.

Your computer image is projected, with a floating toolbar:

When you’re done presenting, click Disconnect on the toolbar.

NOTE: Using the optional Wireless LAN module, you can project

wirelessly. To purchase the Wireless LAN module or other accessories,

see “Optional Accessories.” For more information about using the

projector on a network, see your User’s Guide and EasyMP Operation

Guide.

Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson

Corporation. PrivateLine is a registered trademark of Epson America, Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of

their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

Printed in XXXXXX CPD-27443

Network configuration

If you need to configure the projector for your network, you can use the

projector’s menu system.

Press the Menu button on the remote control, select the Network menu,

then press Enter.

Choose Network Configuration and press Enter.

Select the Wired LAN menu and press Enter.

Choose IP Settings and press Enter. You see a screen like the following:

Do one of the following:

•

If your network assigns addresses automatically, turn on the DHCP

setting.

•

If your network does not assign addresses automatically, turn

off DHCP and enter the projector’s IP Address, Subnet Mask, and

Gateway Address, as needed.

To enter numbers, use the buttons on the remote control to

highlight the number you want to input, then press the Enter button.

When you’re finished entering an address in the network menu, highlight

Return, then press the Enter button.

To prevent the IP address from appearing on the standby screen, set the

IP Address Display setting to Off.

When you’re done making all necessary changes, select Complete and

press the Enter button to save your settings. Then press Enter again to

confirm.

Press the Menu button to exit the menu system.

Where to get help

Manuals

For more information about using the projector, install the manuals from your

projector CD.

Telephone Support Services

To use the Epson PrivateLine

Support service, call (800) 637-7661 and enter

the PIN on the Epson PrivateLine Support card included with your projector.

This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday,

for the duration of your warranty period. You may also speak with a projector

support specialist by dialing one of these numbers:

U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time,

Monday through Friday

Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time,

Monday through Friday

Days and hours of support are subject to change without notice. Toll or long

distance charges may apply.

Internet Support

Visit Epson’s support website at epson.com/support and select your

product for solutions to common problems. You can download utilities and

documentation, get FAQs and troubleshooting advice, or e-mail Epson with

your questions.

Registration

offers. You can use the registration card or CD included with your projector, or

Optional accessories

You can purchase screens, carrying cases, or other accessories from an Epson

authorized reseller. To find the nearest reseller, call 800-GO-EPSON

(800-463-7766). Or you can purchase online at www.epsonstore.com (U.S.

sales) or www.epson.ca (Canadian sales).

Product Part number

Replacement lamp V13H010L50

Air filter replacement set (2 filters) V13H134A22

Image presentation camera (ELPDC05) V12H162020

DC-10s document camera ELPDC10S

DC-06 document camera V12H321001

Wireless LAN module V12H306P11

Quick Wireless Connection USB key V12H005M05

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Epson PowerLite 825 Multimedia Projector Setup Guide Page 5

Comments to this Manuals

Related products and manuals for Serial switch boxes Epson PowerLite 825 Multimedia Projector