Epson B-500DN User Manual download pdf (Page 20)

How To 20

The following table lists the components required for network printing.

4. If the necessary components are not in the list, click Install to install them, as described

below.

For LPR:

Select Protocol and then click Add. In the Select Network Protocol dialog box, select

Internet Protocol (TCP/IP) and then click OK.

For Microsoft Network Shared printing:

To use Internet Protocol, see the description described earlier to install Internet

Protocol (TCP/IP).

Select Client and then click Add. Select Client for Microsoft Networks and then click

OK.

5. For LPR or Microsoft Network Shared printing:

Double-click Internet Protocol (TCP/IP) on the Configuration menu to open the

TCP/IP Properties dialog box. Set the IP address and so on if necessary, then click OK.

6. Restart the computer.

The necessary components are now installed. Go to the section “Connecting the Network

Interface to the Network” on page 21.

Macintosh

To assign an IP address, subnet mask, etc. to your Macintosh, follow the steps below.

1. From the Apple menu, select System Preferences.

2. Open the Network control panel. Click the TCP/IP tab.

Note:

For Mac OS X 10.5, select Ethernet as the connecting method on the Network control panel,

select the method to assign the IP address from the Configure menu, and then assign the IP

address.

3. Select Built-in Ethernet from the Show pull-down menu.

4. Assign an IP address and other settings if necessary.

Printing method Necessary components

LPR Internet Protocol (TCP/IP)

Microsoft Network Shared printing Internet Protocol (TCP/IP)

Client for Microsoft Networks

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 61 62

No comments

Epson B-500DN User Manual Page 20