Epson Equity LT Troubleshooting Guide Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 5
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
EQUITY LT
lnstallation/Support Tips
Power
---
The Equity LT AC adapter is an auto -sensing unit
which adjusts automatically between 100-240 V,
50/60 Hz. Therefore, it can be used anywhere in
the world without special adjustment.
---
When using the Equity LT, equipped with the HDD
and backlit LCD, on battery power, take
conservation measures. These are: 1) set the
backlight period option to 30 seconds, 2) set the
brightness and contrast controls as low as is
comfortable, 3) run at 4.77 MHz and 4) turn the
HDD off, at the power switch in the rear of the
drive, when the HDD is not actually in use.
---
Periodically, discharge the battery completely. This
will help to minimize the memory effect encountered
with NiCad batteries. After the complete discharge,
give the LT a full, 12-hour recharge. This will
help to keep battery charge life as great as
possible.
Video
---
When using the Equity LT with a color monitor, as
opposed to an LCD, make sure that LCD DIP switch
number 4 is set OFF. If the unit is connected to
both LCD and monitor, the display can be switched
back and forth without rebooting.
---
If you find the display, generated by your software
package, is difficult to read, adjust LCD DIP
switches 2 and 3 to find the clearest LCD Mode.
There are four options and one of them should
improve the display.
---
If your software requires that you specify a display
type, select CGA. If it is an option, select CGA -
ONE COLOR. Some software packages have a
display type called BLACK & WHITE for Laptops. If
this is an available option, select it.
EQLT - 4
12/12/88
Software Problems
---
When installing a copy- protected software package
on the Equity LT, set the the CPU speed to 4.77
MHz. This has been found to have fewer conflicts
with copy-protection. After the installation, the
CPU can be switched back to the higher speed.
---
If a software package does not appear to be
compatible with the Equity LT, try switching the
CPU speed to 4.77 MHz before giving up. Some
software packages (e.g., PC-Talk Ill from Headlands
Communications Corp.) have been found to function
only at 4.77 MHz.
Equity Series Computers
Page view 3
1 2 3 4 5

Comments to this Manuals

No comments