Epson P7000 - Multimedia Photo Viewer User Manual download pdf (Page 27)

• AC adapter – must be plugged in to a wall socket and connected to the viewer before

the firmware update can be performed

Firmware Update Procedure:

Download the file epson12870.exe for Windows users or epson12871.dmg for Mac users

from the Epson website (www.epson.com). Follow the on-screen instructions to download and

extract the file onto your computer.

To verify the current firmware version on your viewer, power on the unit, select Settings from

the Home screen and press OK. Then select Device Information and use the 4 way ring to

select the Firmware Version menu. Press OK.

If you see an earlier version such as: 01.29.6838-0108-0107-0112 (P-6000) or

01.29.6838-0108-0107-0112 (P-7000) then proceed to the next section.

Steps:

1. Install a blank memory card into a memory card reader/writer and copy the

“PSV5FIRM” folder (including all the files in the folder) to the root directory of the

memory card.

2. Verify that the battery is installed in the P-6000 or P-7000 viewer.

3. Connect the AC adapter to the viewer, but do not power it on.

4. After the firmware file has been copied to the memory card, insert the CompactFlash or

SD memory card into the viewer.

5. Press and hold down the “OK” and keys while sliding the “POWER” switch as

shown below.

When you see the firmware update screen (see reference image below), release the

OK and

keys. Note: If you do not see this screen, power off the unit and start the

firmware process again.

Page 2 of 3

PSB.2009.01.001

1 2 ... 22 23 24 25 26 27 28

No comments

Epson P7000 - Multimedia Photo Viewer User Manual Page 27