Epson Equity 320SX PLUS User Manual download pdf (Page 28)

Using the Serial lnterface

If you have a printer, a modem, or other peripheral device

with a serial interface, you can connect it to the serial

(IR-232C) port on the back of the computer.

The serial port uses a DB-9P connector, so be sure you have a

compatible cable. To connect a serial device, follow the same

steps as above for connecting a parallel device but insert the

connector into the serial port, marked with a special icon, as

shown below.

Note

You need to ensure that the serial port is set up so it

functions properly. If you are using the port for a serial

printer, you need to redirect printer output to the serial

port instead of the parallel port. To do this, you can use

the MS-DOS MODE or SETMODE command. See your

MS-DOS manuals for instructions.

Setting Up

Your

System

1-11

1 ... 27 28 29 ... 230

No comments

Epson Equity 320SX PLUS User Manual Page 28