Epson 6100 UB User's Guide download pdf (Page 21)

Setting Up the Projector 21

Making Other Connections

Connect the power cable and other cables described below, depending on how you plan to

use the projector.

■ Plug the power cable into the projector and a grounded electrical outlet.

■ The Trigger out port outputs a 12-volt DC signal

when the projector is turned on. This lets a central

control system monitor whether the projector is on

or off, and can be used to raise or lower your

projection screen automatically when the projector

is in use.

Connect a 3.5-mm mini jack to the port, as shown.

To enable the port, turn on the

Trigger Out

setting (see page 48).

■ To use an AV controller with the projector, connect a 9-pin null modem serial cable to

the

RS-232C port. Refer to the table of ESC/VP21 command codes on page 70.

1 ... 20 21 22 ... 80

User’s Guide 1
Copyright Notice 2
Trademarks 2
Contents 3
Maintenance 49 4
Problem Solving 57 5
Specifications 65 5
Notices 71 5
Index 77 5
6 Contents 6
Introduction 7
Projector Parts 8
Projector Control Panel 9
Remote Control Button Map 10
Optional Accessories 11
Registration and Warranty 11
Using This Manual 12
Setting Up the Projector 13
14 Setting Up the Projector 14
2.8 to 6.2 feet 15
3.5 to 7.6 feet 15
16:9 aspect ratio 15
Offset B* 15
16 Setting Up the Projector 16
Installing the Projector 17
18 Setting Up the Projector 18
Connecting the Cables 19
20 Setting Up the Projector 20
Making Other Connections 21
Turning On the Projector 22
Turning Off the Projector 23
Selecting the Image Source 24
Positioning the Image 25
26 Setting Up the Projector 26
Making Basic Adjustments 27
Choosing the Aspect Ratio 28
Choosing the Color Mode 29
Advanced Color Adjustments 30
Adjusting RGBCMY 31
Locking the Projector 32
Making Detailed Adjustments 33
Adjusting the Picture Quality 35
Image > Brightness 36
Image > Contrast 36
Image > Auto Iris 36
Image > Brightness Control 37
Image > Sharpness 37
Signal > Progressive 38
Signal > Motion Detection 38
Color Settings 40
Image > Advanced > RGB 41
■ Auto Setup 42
■ Tracking 42
Projector 43
Renaming Memory Settings 44
Resetting the Projector 45
Image Sizing 46
Screen Options 47
Other Setup Options 47
Maintenance 49
Cleaning the Projector Case 50
Maintenance 51 51
Replacing the Lamp 52
Maintenance 53 53
54 Maintenance 54
Checking the Projector Status 55
Storing the Projector 56
Transporting the Projector 56
Problem Solving 57
58 Problem Solving 58
Solving Picture Problems 59
60 Problem Solving 60
Problem Solving 61 61
62 Problem Solving 62
Where To Get Help 63
64 Problem Solving 64
Specifications 65
Remote Control 66
Dimensions 66
Electrical 66
Environmental 67
Compatible Video Formats 68
Analog RGB (computer display) 69
ESC/VP21 Command Codes 70
Important Safety Information 71
72 Notices 72
FCC Compliance Statement 73
Declaration of Conformity 74
Limited Warranty 75
76 Notices 76
78 Index 78
Index 79 79
80 Index 80

Comments to this Manuals

No comments

Epson 6100 UB User's Guide Page 21

Comments to this Manuals

Related products and manuals for Data projectors Epson 6100 UB