Epson 9700 User Manual download pdf (Page 46)

46 Making Detailed Adjustments

3. Do one of the following:

■ Select Reset Lamp Hours to clear the lamp usage timer and reset it to zero.

You should reset the lamp timer only when you install a new projector lamp. See

page 56 for more information.

■ Select Reset Memory to clear all memory settings.

■ Select Reset All to return all projector settings to their original defaults (except

Component, Save Memory, Language, and Lamp Hours).

Customizing Projector Features

Use the settings in this section to adjust the image size and position, suppress on-screen text,

and select basic setup options.

Image Sizing

Before adjusting any of these settings, make sure you have already selected an appropriate

aspect ratio for the type of picture you’re viewing (see page 27).

■ Overscan

For component video formats, this setting lets you see the edges of the image that are not

normally visible in the picture (see page 67). If you see interference when you set

Overscan to 100%, try adjusting the Position as described below.

■ Position

Note: This setting cannot be used with a signal input through the HDMI 1 or HMDI 2 port.

Use the arrow buttons to fine-tune the position of the image on the screen.

■ Aspect

This setting lets you change the aspect ratio of your image, and works the same as

pressing the

Aspect button on the remote control. See page 27 for more information.

Signal > Advanced > Overscan

Signal > Position

Signal > Aspect

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 79 80

No comments

Epson 9700 User Manual Page 46