Epson XP-850 Quick Start Guide download pdf (Page 29)

Maintaining Your Product 29

Replacing Ink Cartridges

Make sure you have a new ink cartridge before you begin. You must install new cartridges

immediately after removing old ones.

Caution: Do not open ink cartridge packages until you are ready to install the ink.

Cartridges are vacuum packed to maintain reliability.

Leave the expended cartridge installed until you have obtained a replacement, or the

ink remaining in the print head nozzles may dry out.

Note: If you remove a low or expended ink cartridge, you cannot reinstall and use the

cartridge.

1. Turn on your product.

2. If an ink cartridge is expended, you see a message on the LCD screen indicating which

color to replace.

If you’re replacing a cartridge before you see a message on the LCD screen, select

Setup > Ink Levels > Cartridge Replacement.

Note: If a cartridge is expended, you must replace it to be able to print. If a

cartridge is low, you can continue printing until a cartridge needs replacement.

3. Lift up the scanner unit.

Caution: Do not move

the print head by hand;

otherwise, you may

damage your product.

Do not touch the flat

white cable inside the

printer.

4. Push in the blue tab to unlock the ink cartridge you are replacing. Then lift the

bottom of the ink cartridge to remove it.

Warning: If ink gets on your skin, wash it off thoroughly with soap and water. If it

gets in your eyes, flush them immediately with water. If you still have discomfort

or vision problems, see a doctor immediately. Keep ink cartridges out of the reach

of children and don't allow them to drink the ink.

XP850QG.book Page 29 Friday, July 6, 2012 4:36 PM

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 99 100

No comments

Epson XP-850 Quick Start Guide Page 29