Epson STYLUS R2880 User Manual download pdf (Page 37)

Maintaining Your Printer 37

3. Click

Start and follow the on-screen instructions to allow the printer to print

and examine the nozzle check pattern. If necessary, the printer cleans the print

head, and may print and check the nozzle check pattern a few times.

If nozzles are still clogged, you see a message telling you to clean the print

head manually. See the on-screen Reference Guide for instructions.

Note:

If you don’t see any improvement after cleaning the print head four times, turn off your

printer and wait at least six hours to let any dried ink soften. Then try printing again.

If you do not use your R2880 often, it is a good idea to print a few pages at least once a

month to maintain good print quality.

Checking and Aligning the Print Head

If your printouts become grainy or blurry, or you see dark or light bands across

them, you may need to align the print head.

It’s best to run the automatic alignment utility first to let the printer check and

align the print head, if necessary. If you still notice alignment problems, you can

align the print head manually.

Note:

Banding may also occur if your print head nozzles need cleaning (see page 36).

1. Load a few sheets of Epson Presentation Paper Matte (or the photo paper you

have on hand) in the sheet feeder (see page 6). It’s best to use matte or photo

paper for the most accurate alignment.

2. Do one of the following:

Windows: Right-click the icon in

the bottom right corner of your screen

(the taskbar) and select

Print Head

Alignment

Mac OS X: Open the

Applications

folder, open the

EPSON Printer

Utility3

, select SP R2880, and click

OK. Then select Print Head

Alignment

spr2880_ug.book Page 37 Monday, April 6, 2009 1:10 PM

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 63 64

No comments

Epson STYLUS R2880 User Manual Page 37