Epson P-80 User Manual download pdf (Page 18)

You can also access the International characters by using a

control

code.

See

Chapter

for an explanation of control codes and Appendix

B for the appropriate code.

Table 1-2. International character switch settings

Country

SW 1-1 SW 1-2

SW 1-3

U.S.A.

ON ON

France

OFF

ON ON

Germany

OFF

England

OFF OFF

Denmark

ON ON OFF

Sweden

OFF

ON OFF

Italy ON

OFF

Spain

OFF

OFF OFF

Switch 1-4

This switch controls the automatic line feed. The factory-

set condition is OFF which means the computer must send line feeds.

When this switch is ON, the printer performs an automatic line feed

with each carriage return.

If you are not sure if your computer sends a line-feed code to the

printer at the end of each print line, leave the switch the way you find

it. You can change this switch if your first printing occurs all on one

line or with the lines spaced twice as far apart as you requested.

Switch 2

The P-80 uses the

RS-232C

serial interface to communicate data

from your computer to the printer. The switches which make up

switch 2 are used to set up the proper serial communications for the

RS-232C serial port.

The factory-set condition is shown in Table l-3 and should be

appropriate for most computers. If you have any problems getting

data to print correctly from your computer, consult your computer

manual or ask your dealer.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 81 82

Comments to this Manuals

No comments

Epson P-80 User Manual Page 18

Comments to this Manuals

Related products and manuals for Print & Scan Epson P-80