Epson R310 Instruction Manual

Premium Continuous Ink Supply Systems. Instruction Manual For Epson Printers R200, R210, R230, R300 , R310, RX650 RX510, RX630

105) Tube set up – R series printer a) Place the tube clip onto the front of the printer. It should be placed so that the back of the clip is slott

117) Tube Adjustments a) Adjustments to the tube length may be required. To check this, move the cartridge holder left and right to each end of the

128) Refilling your CISS Please ensure to keep topping up your CISS on a regular basis to avoid running it dry. Ink must be refilled prior to it r

139) Priming Only prime your CISS after first installing it and performing 3 head cleans and nozzle checks. If excessive (10cm or more) of air is s

1410) Specific Instructions for Epson R310 Users a) In order to prevent the following warning message being displayed every time you print (“These

1511) Trouble Shooting – Contact RIHAC Digital Solutions on (+61)3 9005 5555 If any of the following trouble shooting suggestions do not fix your p

16Too much ink! v) Please ensure that you do not have your CISS placed higher then the printer level. The CISS works on a vacuum and if raised high

1712) Warranty Please note that your CISS has a manufactures warranty of 3 months from date of purchase. Your warranty will be void if the system is

18

19

2

20 • CIS Systems • High Grade UV Dye Inks • Pigment Inks 157 Union Road, Ascot Vale, Vic 3032 Web: www.rihac.com.

3Installation Manual R200, R210, R230, R300 & R310 RX510, RX630, RX650 -100ml Series Version 4-2009 1) Printer pre-check. ...

4

5Instruction Manual Epson Continuous Ink Supply Systems R200, R210, R230, R300, R310, RX510, RX630 RX650 -100ml Series Congratulations on your purch

6Your printer will print either of the following; A No missing lines. B Missing lines. If your printer has produced a perfect result

72) Preparing your new CISS for installation Please ensure the following are present with your CISS. (1) Air filters x 6 (2) Double sided

8b) Using the syringe with the large needle attached, remove any excess from the air chamber. Please discard this excess ink. c) Insert all t

9 4) Installing the CISS a) Turn on your printer and press cartridge change button on the printer. The cartridge holder will move into the middle of